[Fri May  3 00:56:12 2013] Detection parameters:
  Position = (245.1, 232.8) = 2 36 48.32 -52 24 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.5 +/- 9.7
  Background counts = 6.1
  Rate = 0.004 +/- 0.0007

[Fri May  3 00:56:12 2013] Off-axis axis estimate = 6.13'
[Fri May  3 01:59:34 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Fri May  3 01:59:34 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Fri May  3 01:59:34 2013] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.112
[Fri May  3 01:59:34 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.49"
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src14.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src14.csv
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src14.csv
[Fri May  3 02:50:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May  3 02:50:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 03:57:24 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.782565 pixels away
[Fri May  3 03:57:24 2013] Vigneting correction estimate = 1.000000
[Fri May  3 03:57:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 03:57:24 2013] Assessing source extent using major
[Fri May  3 03:57:24 2013] Source does appear to be extended
[Fri May  3 03:57:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:00:57 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:00:57 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Fri May  3 05:00:57 2013] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.112
[Fri May  3 05:00:57 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.49"
[Fri May  3 05:49:09 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_src14.ximg exists
[Fri May  3 05:49:09 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri May  3 05:49:09 2013] Fit fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri May  3 05:49:10 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri May  3 05:49:10 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May  3 05:49:10 2013] Fit fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri May  3 06:31:14 2013] Spatial fit model total counts = 115.871000, observed total counts = 110.000000
[Fri May  3 06:31:14 2013] Offset between fit and detection position for source 31 = 0.057105 pixels
[Fri May  3 06:31:14 2013] 117.624500 total counts/ 83.828900 bgd. counts: snr = 3.691163
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.057105 pixels
  Position = (245.1, 232.8) = 2 36 48.34 -52 24 23.3
  Extent = 3.7 (2.8-4.9)", rotation angle = 0
  Source counts = 33.8 +/- 10.8
  Background counts = 83.8
  Rate = 0.001 +/- 0.0005
[Fri May  3 06:31:14 2013] Vigneting correction estimate = 1.000000
[Fri May  3 06:31:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 06:31:14 2013] Assessing source extent using major axis lower bound
[Fri May  3 06:31:14 2013] Source does appear to be extended
[Fri May  3 06:31:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 07:36:04 2013] XMMSAS src. selection expression = ellipse(21275.832260, 20205.333200, 221.879406, 221.879406, 0.000000, X, Y)
[Fri May  3 07:36:04 2013] Writing source region out to fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src31_src.reg
[Fri May  3 07:36:04 2013] Extracting stamp from image fullrun_mos1_xmm0098810101_pi300-10000_cl_sm2.00.img.gz, (232, 220) - (258, 246)
[Fri May  3 07:36:04 2013] XMMSAS bgd. selection expression = annulus(21275.832260, 20205.333200, 369.799011, 739.598021, X, Y)
[Fri May  3 07:36:04 2013] Writing fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src31.gif
[Fri May  3 07:40:33 2013] Mean detx,y = (-8187.95, 1488.76) 
[Fri May  3 07:40:33 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 07:40:39 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 07:40:39 2013] Setting source spectrum file to fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri May  3 07:40:39 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri May  3 08:07:32 2013] Not generating rmf since there are only 33 counts
[Fri May  3 08:07:32 2013] rmf not generated due to insufficient counts