[Fri May  3 00:56:12 2013] Detection parameters:
  Position = (375.5, 248.0) = 2 35 46.36 -52 23 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.6 +/- 9.1
  Background counts = 5.5
  Rate = 0.003 +/- 0.0005

[Fri May  3 00:56:12 2013] Off-axis axis estimate = 6.68'
[Fri May  3 01:59:34 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri May  3 01:59:34 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Fri May  3 01:59:34 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.995
[Fri May  3 01:59:34 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 9.77"
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src22.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src22.csv
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src22.csv
[Fri May  3 02:50:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri May  3 02:50:29 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri May  3 02:50:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri May  3 02:50:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098810101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 03:57:24 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 11.602108 pixels away
[Fri May  3 03:57:24 2013] Vigneting correction estimate = 1.000000
[Fri May  3 03:57:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 03:57:24 2013] Assessing source extent using major
[Fri May  3 03:57:24 2013] Source does appear to be extended
[Fri May  3 03:57:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:00:57 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:00:57 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Fri May  3 05:00:57 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.995
[Fri May  3 05:00:57 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 9.77"
[Fri May  3 05:49:10 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_src22.ximg exists
[Fri May  3 05:49:10 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri May  3 05:49:10 2013] Fit fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_src22 appears to have run properly
[Fri May  3 05:49:10 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri May  3 05:49:10 2013] fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri May  3 05:49:10 2013] Fit fullrun_mos1_xmm0098810101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri May  3 06:31:14 2013] Spatial fit model total counts = 105.476000, observed total counts = 98.000000
[Fri May  3 06:31:14 2013] Offset between fit and detection position for source 28 = 0.092596 pixels
[Fri May  3 06:31:14 2013] 105.697800 total counts/ 71.190100 bgd. counts: snr = 4.089839
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.092596 pixels
  Position = (375.6, 247.9) = 2 35 46.33 -52 23 17.5
  Extent = 5.8 (4.0-8.3)", rotation angle = 0
  Source counts = 34.5 +/- 10.3
  Background counts = 71.2
  Rate = 0.001 +/- 0.0004
[Fri May  3 06:31:14 2013] Vigneting correction estimate = 1.000000
[Fri May  3 06:31:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 06:31:14 2013] Assessing source extent using major axis lower bound
[Fri May  3 06:31:14 2013] Source does appear to be extended
[Fri May  3 06:31:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 07:36:04 2013] XMMSAS src. selection expression = ellipse(32626.989200, 21519.048600, 349.422610, 349.422610, 0.000000, X, Y)
[Fri May  3 07:36:04 2013] Writing source region out to fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src28_src.reg
[Fri May  3 07:36:04 2013] Extracting stamp from image fullrun_mos1_xmm0098810101_pi300-10000_cl_sm2.00.img.gz, (355, 228) - (396, 268)
[Fri May  3 07:36:04 2013] XMMSAS bgd. selection expression = annulus(32626.989200, 21519.048600, 582.371017, 1164.742034, X, Y)
[Fri May  3 07:36:04 2013] Writing fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src28.gif
[Fri May  3 07:42:30 2013] Mean detx,y = (2438.00, 5686.85) 
[Fri May  3 07:42:31 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 07:42:47 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 07:42:47 2013] Setting source spectrum file to fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri May  3 07:42:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0098810101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri May  3 08:08:10 2013] Not generating rmf since there are only 34 counts
[Fri May  3 08:08:10 2013] rmf not generated due to insufficient counts