[Sun Jun  3 01:22:59 2012] Detection parameters:
  Position = (432.8, 155.8) = 16 26 58.62 -49 21 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 9.2
  Background counts = 16.8
  Rate = 0.0008 +/- 0.0002

[Sun Jun  3 01:23:00 2012] Off-axis axis estimate = 14.20'
[Sun Jun  3 12:03:59 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 12:03:59 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Sun Jun  3 12:03:59 2012] source mask rpix=3.1, npix_max = 52, mask sum = 34, frac = 0.652
[Sun Jun  3 12:03:59 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 13.53"
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src36.ximg exists
[Sun Jun  3 13:36:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src36.csv
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Jun  3 13:36:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src36.csv
[Sun Jun  3 13:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 13:36:33 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Jun  3 13:36:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Jun  3 13:36:33 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Jun  3 13:36:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Jun  3 13:36:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 13:36:58 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 13.333836 pixels away
[Sun Jun  3 13:36:58 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:58 2012] Assessing source extent using major
[Sun Jun  3 13:36:58 2012] Source does appear to be extended
[Sun Jun  3 13:36:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 13:36:58 2012] Deleting source due to low Poisson probability 0.8