[Sun Jun  3 01:22:59 2012] Detection parameters:
  Position = (290.0, 171.3) = 16 28 2.18 -49 19 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.3 +/- 13.7
  Background counts = 41.6
  Rate = 0.003 +/- 0.0005

[Sun Jun  3 01:23:00 2012] Off-axis axis estimate = 9.24'
[Sun Jun  3 12:03:59 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 12:03:59 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Sun Jun  3 12:03:59 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.920
[Sun Jun  3 12:03:59 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.05"
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun  3 13:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src11.csv
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun  3 13:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src11.csv
[Sun Jun  3 13:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun  3 13:36:32 2012] Fit fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jun  3 13:36:58 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.091057 pixels away
[Sun Jun  3 13:36:58 2012] Spatial fit model total counts = 705.392000, observed total counts = 702.000000
[Sun Jun  3 13:36:58 2012] Offset between fit and detection position for source 17 = 0.507351 pixels
[Sun Jun  3 13:36:58 2012] 656.393000 total counts/ 617.719000 bgd. counts: snr = 1.556050
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.507351 pixels
  Position = (290.3, 171.7) = 16 28 2.05 -49 19 55.5
  Extent = 4.7 (2.8-8.4)", rotation angle = 0
  Source counts = 38.7 +/- 25.6
  Background counts = 617.7
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability