[Sun Jun  3 01:22:59 2012] Detection parameters:
  Position = (282.2, 194.2) = 16 28 5.64 -49 18 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.4 +/- 14.8
  Background counts = 63.0
  Rate = 0.002 +/- 0.0005

[Sun Jun  3 01:23:00 2012] Off-axis axis estimate = 7.65'
[Sun Jun  3 12:03:59 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 12:03:59 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Sun Jun  3 12:03:59 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Sun Jun  3 12:03:59 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.25"
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun  3 13:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src16.csv
[Sun Jun  3 13:36:32 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun  3 13:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src16.csv
[Sun Jun  3 13:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 13:36:33 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun  3 13:36:33 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun  3 13:36:33 2012] Fit fullrun_mos2_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Jun  3 13:36:58 2012] Spatial fit model total counts = 799.426000, observed total counts = 780.000000
[Sun Jun  3 13:36:58 2012] Offset between fit and detection position for source 13 = 2.089834 pixels
[Sun Jun  3 13:36:58 2012] 700.003000 total counts/ 473.834000 bgd. counts: snr = 10.390106
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.089834 pixels
  Position = (282.1, 192.1) = 16 28 5.72 -49 18 26.7
  Extent = 13.6 (7.4-20.5)", rotation angle = 0
  Source counts = 226.2 +/- 26.5
  Background counts = 473.8
  Rate = 0.004 +/- 0.0005
[Sun Jun  3 13:36:58 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:58 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 13:36:58 2012] Source does appear to be extended
[Sun Jun  3 13:36:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 13:36:58 2012] Source is confused with source 12
[Mon Jun  4 16:38:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 16:38:45 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Mon Jun  4 16:38:45 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.215
[Mon Jun  4 16:38:45 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.61"
[Mon Jun  4 20:28:09 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jun  4 20:28:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_src10.csv
[Mon Jun  4 20:28:09 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jun  4 20:28:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_src10.csv
[Mon Jun  4 20:28:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 20:28:09 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jun  4 20:28:09 2012] fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jun  4 20:28:09 2012] Fit fullrun_mos2_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Jun  4 20:28:30 2012] Warning, spatial fit 10 centroid is now closest to src. 27
[Mon Jun  4 20:28:30 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 20:28:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 20:28:30 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 20:28:30 2012] Source does appear to be extended
[Mon Jun  4 20:28:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 21:00:44 2012] XMMSAS src. selection expression = ellipse(24491.991600, 16662.584000, 816.516023, 816.516023, 0.000000, X, Y)
[Tue Jun  5 21:00:44 2012] Writing source region out to fullrun_mos2_xmm0098610201_pi300-10000_pass1_cl_src13_src.reg
[Tue Jun  5 21:00:44 2012] Extracting stamp from image fullrun_mos2_xmm0098610201_pi300-10000_cl_sm2.00.img.gz, (235, 145) - (329, 239)
[Tue Jun  5 21:00:44 2012] XMMSAS bgd. selection expression = annulus(24491.991600, 16662.584000, 1360.860039, 2721.720078, X, Y) && !ellipse(22524.120800, 14469.582300, 586.044817, 586.044817, 0.000000, X, Y) && !ellipse(25329.674600, 17670.530000, 1881.176054, 1881.176054, 0.000000, X, Y) && !ellipse(25279.824800, 12545.550000, 1890.648054, 1890.648054, 0.000000, X, Y)
[Tue Jun  5 21:00:44 2012] Writing fullrun_mos2_xmm0098610201_pi300-10000_pass1_cl_src13.gif
[Tue Jun  5 21:19:07 2012] Mean detx,y = (-334.08, 7592.82) 
[Tue Jun  5 21:19:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 21:19:32 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 21:19:32 2012] Setting source spectrum file to fullrun_mos2_xmm0098610201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jun  5 21:19:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0098610201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jun  5 21:54:49 2012] Updating aperture counts using extracted products
[Tue Jun  5 21:54:49 2012] Error reading totcts from fullrun_mos2_xmm0098610201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jun  5 21:54:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 21:54:49 2012] Using photon index=1.80, rate=0.00401, arf fullrun_mos2_xmm0098610201_pi300-10000_pass1_cl_src13.arf
[Tue Jun  5 21:54:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 21:54:49 2012] Updating source flux to 6.4e-14
[Tue Jun  5 22:05:19 2012] Flag c found in src. 13 procflags, skipping spectral fitting