[Sun Jun  3 01:22:35 2012] Detection parameters:
  Position = (291.9, 137.6) = 16 28 1.36 -49 22 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.3 +/- 11.9
  Background counts = 31.9
  Rate = 0.0009 +/- 0.0002

[Sun Jun  3 01:22:35 2012] Off-axis axis estimate = 11.67'
[Sun Jun  3 03:23:34 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:23:34 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Sun Jun  3 03:23:34 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.953
[Sun Jun  3 03:23:34 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 12.26"
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src77.ximg exists
[Sun Jun  3 12:03:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src77.csv
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src77_1.ximg exists
[Sun Jun  3 12:03:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src77.csv
[Sun Jun  3 12:03:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 12:03:59 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sun Jun  3 12:03:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src77.csv
[Sun Jun  3 12:03:59 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sun Jun  3 12:03:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src77.csv
[Sun Jun  3 12:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 13:36:51 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 76 at 11.919042 pixels away
[Sun Jun  3 13:36:51 2012] Warning, spatial fit 77 centroid is now closest to src. 52
[Sun Jun  3 13:36:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:51 2012] Assessing source extent using major
[Sun Jun  3 13:36:51 2012] Source does appear to be extended
[Sun Jun  3 13:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 13:36:51 2012] Deleting source due to low Poisson probability 0.8