[Sun Jun  3 01:22:35 2012] Detection parameters:
  Position = (230.1, 294.3) = 16 28 28.75 -49 10 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.4 +/- 23.4
  Background counts = 183.4
  Rate = 0.003 +/- 0.0005

[Sun Jun  3 01:22:35 2012] Off-axis axis estimate = 4.96'
[Sun Jun  3 03:23:34 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:23:34 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Sun Jun  3 03:23:34 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Sun Jun  3 03:23:34 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.91"
[Sun Jun  3 12:03:56 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src44.ximg exists
[Sun Jun  3 12:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src44.csv
[Sun Jun  3 12:03:56 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun Jun  3 12:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src44.csv
[Sun Jun  3 12:03:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Jun  3 12:03:57 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sun Jun  3 13:36:51 2012] Spatial fit model total counts = 2351.390000, observed total counts = 2356.000000
[Sun Jun  3 13:36:51 2012] Offset between fit and detection position for source 62 = 0.342978 pixels
[Sun Jun  3 13:36:51 2012] 2371.401600 total counts/ 2319.420000 bgd. counts: snr = 1.079344
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.342978 pixels
  Position = (230.0, 294.6) = 16 28 28.80 -49 11 0.4
  Extent = 2.8 (2.2-4.1)", rotation angle = 0
  Source counts = 52.0 +/- 48.7
  Background counts = 2319.4
  Rate = 0.0009 +/- 0.0009
  Deleting source due to low Poisson probability