[Sun Jun  3 01:22:34 2012] Detection parameters:
  Position = (280.4, 330.0) = 16 28 6.44 -49 8 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.2 +/- 26.5
  Background counts = 206.6
  Rate = 0.003 +/- 0.0005

[Sun Jun  3 01:22:35 2012] Off-axis axis estimate = 2.64'
[Sun Jun  3 03:23:34 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:23:34 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sun Jun  3 03:23:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Sun Jun  3 03:23:34 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.75"
[Sun Jun  3 12:03:56 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jun  3 12:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src41.csv
[Sun Jun  3 12:03:56 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jun  3 12:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src41.csv
[Sun Jun  3 12:03:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jun  3 12:03:57 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Jun  3 13:36:50 2012] Spatial fit model total counts = 3972.360000, observed total counts = 3975.000000
[Sun Jun  3 13:36:50 2012] Offset between fit and detection position for source 47 = 7.097971 pixels
[Sun Jun  3 13:36:50 2012] Warning, changing simple spatial fit ID from 41 to 24
[Sun Jun  3 13:36:50 2012] 3829.835000 total counts/ 3633.110000 bgd. counts: snr = 3.263776
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 7.097971 pixels
  Position = (281.8, 337.0) = 16 28 5.81 -49 7 56.4
  Extent = 15.3 (15.3-30.7)", rotation angle = 0
  Source counts = 196.7 +/- 61.9
  Background counts = 3633.1
  Rate = 0.003 +/- 0.001
[Sun Jun  3 13:36:51 2012] Source 47 is offset by 2.775931 and 3.446138 pixels which is larger than
2 X fitted extent = 0.890584 x 0.890584, not incorporating fit results
[Sun Jun  3 13:36:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:51 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 13:36:51 2012] Source does appear to be extended
[Sun Jun  3 13:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 13:36:51 2012] Source is confused with source 11
[Sun Jun  3 13:36:51 2012] Source is confused with source 43
[Mon Jun  4 11:29:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:29:35 2012] Initial guess for spatial extent in simple fitting = 15.33"
[Mon Jun  4 11:29:35 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.988
[Mon Jun  4 11:29:35 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 15.33"
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src36.ximg exists
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon Jun  4 16:38:43 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src36 appears to have run properly
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Jun  4 16:38:44 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Jun  4 20:28:25 2012] Spatial fit model total counts = 6559.690000, observed total counts = 6554.000000
[Mon Jun  4 20:28:25 2012] Offset between fit and detection position for source 47 = 4.789663 pixels
[Mon Jun  4 20:28:25 2012] Warning, changing simple spatial fit ID from 36 to 22
[Mon Jun  4 20:28:25 2012] 6348.265000 total counts/ 5571.020000 bgd. counts: snr = 10.413353
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 4.789663 pixels
  Position = (285.1, 340.5) = 16 28 4.37 -49 7 41.1
  Extent = 29.3 (29.3-58.7)", rotation angle = 0
  Source counts = 777.2 +/- 79.7
  Background counts = 5571.0
  Rate = 0.01 +/- 0.001
[Mon Jun  4 20:28:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 20:28:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 20:28:25 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 20:28:25 2012] Source does appear to be extended
[Mon Jun  4 20:28:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 12:00:48 2012] XMMSAS src. selection expression = ellipse(24752.273400, 29576.158000, 1760.484051, 1760.484051, 0.000000, X, Y)
[Tue Jun  5 12:00:48 2012] Writing source region out to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src47_src.reg
[Tue Jun  5 12:00:48 2012] Extracting stamp from image fullrun_mos1_xmm0098610201_pi300-10000_cl_sm2.00.img.gz, (184, 239) - (386, 442)
[Tue Jun  5 12:00:48 2012] XMMSAS bgd. selection expression = annulus(24752.273400, 29576.158000, 2934.140084, 5868.280169, X, Y) && !ellipse(25070.123600, 24491.313400, 5069.328146, 5069.328146, 0.000000, X, Y) && !ellipse(24368.562000, 25049.638000, 3444.432099, 3444.432099, 0.000000, X, Y) && !ellipse(26339.884000, 22311.860000, 2705.792078, 2705.792078, 0.000000, X, Y) && !ellipse(28219.336731, 24493.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28778.774000, 24630.236200, 1789.672051, 1789.672051, 0.000000, X, Y) && !ellipse(25020.817800, 28031.620000, 1167.848034, 633.997618, 348.132000, X, Y) && !ellipse(21524.146698, 26094.928314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30275.870000, 24612.045000, 1385.040040, 1385.040040, 0.000000, X, Y) && !ellipse(20769.182800, 24397.304200, 1391.632040, 365.499211, 0.325000, X, Y) && !ellipse(28117.054382, 22854.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.623600, 28953.422000, 1801.848052, 1801.848052, 0.000000, X, Y) && !ellipse(22712.344000, 27614.196000, 1272.392037, 1272.392037, 0.000000, X, Y) && !ellipse(28773.945801, 24056.192383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.574524, 28650.163025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18322.064545, 24552.220886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19921.767800, 24354.579200, 666.435219, 666.435219, 0.000000, X, Y) && !ellipse(27700.939606, 27616.589325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26300.156769, 28572.121094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26700.962646, 28641.494354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19547.719200, 24375.068800, 1477.784043, 1477.784043, 0.000000, X, Y) && !ellipse(26395.724548, 29090.491669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21449.377090, 26992.160950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20407.886000, 26930.450000, 1146.472033, 1146.472033, 0.000000, X, Y) && !ellipse(22033.516000, 28603.626000, 2544.784073, 2544.784073, 0.000000, X, Y)
[Tue Jun  5 12:00:48 2012] Writing fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src47.gif
[Tue Jun  5 13:23:07 2012] Mean detx,y = (-4661.39, -298.99) 
[Tue Jun  5 13:23:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 13:24:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 13:24:39 2012] Setting source spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Jun  5 13:24:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue Jun  5 21:54:46 2012] Updating aperture counts using extracted products
[Tue Jun  5 21:54:46 2012] Error reading totcts from fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Jun  5 21:54:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 21:54:48 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src47.arf
[Tue Jun  5 21:54:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 21:54:48 2012] Updating source flux to 1.4e-13
[Tue Jun  5 21:54:50 2012] Flag b found in src. 47 procflags, skipping spectral fitting
[Tue Jun  5 21:54:50 2012] Flag c found in src. 47 procflags, skipping spectral fitting