[Sun Jun  3 01:22:34 2012] Detection parameters:
  Position = (259.5, 166.9) = 16 28 15.77 -49 20 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 390.9 +/- 26.4
  Background counts = 50.4
  Rate = 0.01 +/- 0.0008

[Sun Jun  3 01:22:35 2012] Off-axis axis estimate = 9.94'
[Sun Jun  3 03:23:34 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:23:34 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Sun Jun  3 03:23:34 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.078
[Sun Jun  3 03:23:34 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.40"
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src10.csv
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src10.csv
[Sun Jun  3 12:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun  3 12:03:57 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Jun  3 13:36:50 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 13.711669 pixels away
[Sun Jun  3 13:36:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:51 2012] Assessing source extent using major
[Sun Jun  3 13:36:51 2012] Source does appear to be extended
[Sun Jun  3 13:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 11:29:35 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:29:35 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Mon Jun  4 11:29:35 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.078
[Mon Jun  4 11:29:35 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.40"
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jun  4 16:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src10.csv
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jun  4 16:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src10.csv
[Mon Jun  4 16:38:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jun  4 16:38:44 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Jun  4 20:28:25 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 13.711669 pixels away
[Mon Jun  4 20:28:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 20:28:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 20:28:25 2012] Assessing source extent using major
[Mon Jun  4 20:28:25 2012] Source does appear to be extended
[Mon Jun  4 20:28:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 12:00:47 2012] XMMSAS src. selection expression = ellipse(22528.233643, 14473.419037, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  5 12:00:47 2012] Writing source region out to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src37_src.reg
[Tue Jun  5 12:00:47 2012] Extracting stamp from image fullrun_mos1_xmm0098610201_pi300-10000_cl_sm2.00.img.gz, (222, 129) - (297, 204)
[Tue Jun  5 12:00:47 2012] XMMSAS bgd. selection expression = annulus(22528.233643, 14473.419037, 1087.500000, 2175.000000, X, Y)
[Tue Jun  5 12:00:47 2012] Writing fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src37.gif
[Tue Jun  5 12:53:07 2012] Mean detx,y = (9952.96, 2213.50) 
[Tue Jun  5 12:53:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 12:53:25 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 12:53:26 2012] Setting source spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun  5 12:53:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jun  5 19:14:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 19:14:18 2012] rmf not generated due to insufficient counts
[Tue Jun  5 21:54:45 2012] Updating aperture counts using extracted products
[Tue Jun  5 21:54:45 2012] Error reading totcts from fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun  5 21:54:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 21:54:47 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src37.arf
[Tue Jun  5 21:54:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 21:54:47 2012] Updating source flux to 1.9e-13
[Tue Jun  5 21:54:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting