[Sun Jun  3 01:22:34 2012] Detection parameters:
  Position = (349.5, 283.2) = 16 27 35.80 -49 11 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.7 +/- 27.7
  Background counts = 134.3
  Rate = 0.007 +/- 0.0007

[Sun Jun  3 01:22:35 2012] Off-axis axis estimate = 3.86'
[Sun Jun  3 03:23:34 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:23:34 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Sun Jun  3 03:23:34 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Sun Jun  3 03:23:34 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.36"
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src19.csv
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src19.csv
[Sun Jun  3 12:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun  3 12:03:57 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Jun  3 13:36:50 2012] Spatial fit model total counts = 2455.940000, observed total counts = 2455.000000
[Sun Jun  3 13:36:50 2012] Offset between fit and detection position for source 22 = 5.316110 pixels
[Sun Jun  3 13:36:50 2012] 2456.611000 total counts/ 1738.560000 bgd. counts: snr = 17.221083
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 5.316110 pixels
  Position = (344.1, 283.0) = 16 27 38.16 -49 11 51.2
  Extent = 16.7 (16.7-33.4)", rotation angle = 0
  Source counts = 718.1 +/- 49.6
  Background counts = 1738.6
  Rate = 0.01 +/- 0.0009
[Sun Jun  3 13:36:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:51 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 13:36:51 2012] Source does appear to be extended
[Sun Jun  3 13:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 13:36:51 2012] Source is confused with source 24
[Mon Jun  4 11:29:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:29:35 2012] Initial guess for spatial extent in simple fitting = 16.72"
[Mon Jun  4 11:29:35 2012] source mask rpix=3.8, npix_max = 75, mask sum = 64, frac = 0.848
[Mon Jun  4 11:29:35 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 16.72"
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun  4 16:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src17.csv
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun  4 16:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src17.csv
[Mon Jun  4 16:38:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun  4 16:38:44 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jun  4 20:28:25 2012] Spatial fit model total counts = 5665.210000, observed total counts = 5658.000000
[Mon Jun  4 20:28:25 2012] Offset between fit and detection position for source 22 = 4.438703 pixels
[Mon Jun  4 20:28:25 2012] 5046.912000 total counts/ 4354.810000 bgd. counts: snr = 10.487827
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 4.438703 pixels
  Position = (348.6, 283.5) = 16 27 36.20 -49 11 49.1
  Extent = 17.3 (14.2-22.4)", rotation angle = 0
  Source counts = 692.1 +/- 71.0
  Background counts = 4354.8
  Rate = 0.01 +/- 0.001
[Mon Jun  4 20:28:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 20:28:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 20:28:25 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 20:28:25 2012] Source does appear to be extended
[Mon Jun  4 20:28:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 12:00:47 2012] XMMSAS src. selection expression = ellipse(30275.870000, 24612.045000, 1038.780030, 1038.780030, 0.000000, X, Y)
[Tue Jun  5 12:00:47 2012] Writing source region out to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src22_src.reg
[Tue Jun  5 12:00:47 2012] Extracting stamp from image fullrun_mos1_xmm0098610201_pi300-10000_cl_sm2.00.img.gz, (289, 224) - (408, 343)
[Tue Jun  5 12:00:47 2012] XMMSAS bgd. selection expression = annulus(30275.870000, 24612.045000, 1731.300050, 3462.600100, X, Y) && !ellipse(25070.123600, 24491.313400, 5069.328146, 5069.328146, 0.000000, X, Y) && !ellipse(24368.562000, 25049.638000, 3444.432099, 3444.432099, 0.000000, X, Y) && !ellipse(30240.303420, 23108.359000, 407.121612, 407.121612, 0.000000, X, Y) && !ellipse(26339.884000, 22311.860000, 2705.792078, 2705.792078, 0.000000, X, Y) && !ellipse(28219.336731, 24493.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28778.774000, 24630.236200, 1789.672051, 1789.672051, 0.000000, X, Y) && !ellipse(28117.054382, 22854.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28773.945801, 24056.192383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.939606, 27616.589325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26300.156769, 28572.121094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28750.310000, 22279.538000, 1279.928037, 1279.928037, 0.000000, X, Y) && !ellipse(26700.962646, 28641.494354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24752.273400, 29576.158000, 2347.312068, 2347.312068, 0.000000, X, Y) && !ellipse(28774.324000, 22132.346000, 1303.760038, 1303.760038, 0.000000, X, Y) && !ellipse(28393.766000, 21068.000000, 1366.424039, 1366.424039, 0.000000, X, Y) && !ellipse(27404.304000, 20933.518000, 1352.896039, 1352.896039, 0.000000, X, Y)
[Tue Jun  5 12:00:47 2012] Writing fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src22.gif
[Tue Jun  5 13:07:54 2012] Mean detx,y = (11.98, -5563.43) 
[Tue Jun  5 13:07:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 13:08:35 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 13:08:36 2012] Setting source spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Jun  5 13:08:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Jun  5 21:54:45 2012] Updating aperture counts using extracted products
[Tue Jun  5 21:54:45 2012] Error reading totcts from fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Jun  5 21:54:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 21:54:47 2012] Using photon index=1.80, rate=0.0123, arf fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src22.arf
[Tue Jun  5 21:54:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 21:54:47 2012] Updating source flux to 1.5e-13
[Tue Jun  5 21:54:50 2012] Flag c found in src. 22 procflags, skipping spectral fitting