[Sun Jun  3 01:22:33 2012] Detection parameters:
  Position = (323.0, 298.9) = 16 27 47.54 -49 10 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.5 +/- 34.9
  Background counts = 220.7
  Rate = 0.008 +/- 0.0007

[Sun Jun  3 01:22:35 2012] Off-axis axis estimate = 1.78'
[Sun Jun  3 03:23:34 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:23:34 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Sun Jun  3 03:23:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Sun Jun  3 03:23:34 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.32"
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src15.csv
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src15.csv
[Sun Jun  3 12:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jun  3 12:03:57 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jun  3 13:36:50 2012] Warning, spatial fit 15 centroid is now closest to src. 58
[Sun Jun  3 13:36:51 2012] Spatial fit model total counts = 3164.430000, observed total counts = 3164.000000
[Sun Jun  3 13:36:51 2012] Offset between fit and detection position for source 18 = 1.482845 pixels
[Sun Jun  3 13:36:51 2012] Warning, changing simple spatial fit ID from 15 to 38
[Sun Jun  3 13:36:51 2012] 2977.179000 total counts/ 2845.940000 bgd. counts: snr = 2.460085
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.482845 pixels
  Position = (323.9, 300.0) = 16 27 47.15 -49 10 37.1
  Extent = 10.4 (3.5-15.1)", rotation angle = 0
  Source counts = 131.2 +/- 54.6
  Background counts = 2845.9
  Rate = 0.002 +/- 0.001
[Sun Jun  3 13:36:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:51 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 13:36:51 2012] Source does appear to be extended
[Sun Jun  3 13:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 11:29:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:29:35 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Mon Jun  4 11:29:35 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.074
[Mon Jun  4 11:29:35 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.42"
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jun  4 16:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src13.csv
[Mon Jun  4 16:38:43 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jun  4 16:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src13.csv
[Mon Jun  4 16:38:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jun  4 16:38:44 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Jun  4 20:28:25 2012] Warning, spatial fit 13 centroid is now closest to src. 20
[Mon Jun  4 20:28:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 20:28:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 20:28:25 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 20:28:25 2012] Source does appear to be extended
[Mon Jun  4 20:28:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 20:28:25 2012] Deleting source due to low Poisson probability 0.9