[Sun Jun  3 01:22:33 2012] Detection parameters:
  Position = (423.3, 273.2) = 16 27 3.00 -49 12 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1537.4 +/- 47.5
  Background counts = 32.7
  Rate = 0.03 +/- 0.0008

[Sun Jun  3 01:22:35 2012] Off-axis axis estimate = 9.24'
[Sun Jun  3 03:23:34 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:23:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 03:23:34 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Sun Jun  3 03:23:34 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Sun Jun  3 03:23:34 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.05"
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src5.csv
[Sun Jun  3 12:03:55 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun  3 12:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src5.csv
[Sun Jun  3 12:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun  3 12:03:57 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun  3 12:03:57 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun  3 13:36:50 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.762921 pixels away
[Sun Jun  3 13:36:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 13:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 13:36:51 2012] Assessing source extent using major
[Sun Jun  3 13:36:51 2012] Source does appear to be extended
[Sun Jun  3 13:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 11:29:35 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:29:35 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Mon Jun  4 11:29:35 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Mon Jun  4 11:29:35 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.05"
[Mon Jun  4 16:38:42 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun  4 16:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src5.csv
[Mon Jun  4 16:38:42 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun  4 16:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src5.csv
[Mon Jun  4 16:38:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun  4 16:38:44 2012] fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun  4 16:38:44 2012] Fit fullrun_mos1_xmm0098610201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun  4 20:28:25 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.762921 pixels away
[Mon Jun  4 20:28:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 20:28:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 20:28:25 2012] Assessing source extent using major
[Mon Jun  4 20:28:25 2012] Source does appear to be extended
[Mon Jun  4 20:28:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 12:00:47 2012] Counts = 1537.430176, rescaling region sizes by 2.000000
[Tue Jun  5 12:00:47 2012] XMMSAS src. selection expression = ellipse(36780.258331, 23715.783112, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun  5 12:00:47 2012] Writing source region out to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun  5 12:00:47 2012] Extracting stamp from image fullrun_mos1_xmm0098610201_pi300-10000_cl_sm2.00.img.gz, (348, 198) - (498, 348)
[Tue Jun  5 12:00:47 2012] XMMSAS bgd. selection expression = annulus(36780.258331, 23715.783112, 4350.000000, 8700.000000, X, Y) && !ellipse(25070.123600, 24491.313400, 5069.328146, 5069.328146, 0.000000, X, Y) && !ellipse(30240.303420, 23108.359000, 407.121612, 407.121612, 0.000000, X, Y) && !ellipse(26339.884000, 22311.860000, 2705.792078, 2705.792078, 0.000000, X, Y) && !ellipse(28219.336731, 24493.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28778.774000, 24630.236200, 1789.672051, 1789.672051, 0.000000, X, Y) && !ellipse(30275.870000, 24612.045000, 1385.040040, 1385.040040, 0.000000, X, Y) && !ellipse(28117.054382, 22854.741180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28773.945801, 24056.192383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.939606, 27616.589325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28750.310000, 22279.538000, 1279.928037, 1279.928037, 0.000000, X, Y) && !ellipse(28774.324000, 22132.346000, 1303.760038, 1303.760038, 0.000000, X, Y) && !ellipse(28393.766000, 21068.000000, 1366.424039, 1366.424039, 0.000000, X, Y) && !ellipse(27404.304000, 20933.518000, 1352.896039, 1352.896039, 0.000000, X, Y)
[Tue Jun  5 12:00:47 2012] Writing fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src1.gif
[Tue Jun  5 12:32:16 2012] Mean detx,y = (1014.40, -12150.53) 
[Tue Jun  5 12:32:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 12:35:35 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 12:35:36 2012] Setting source spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 12:35:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun  5 16:34:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 16:34:13 2012] rmf not generated due to insufficient counts
[Tue Jun  5 21:54:45 2012] Updating aperture counts using extracted products
[Tue Jun  5 21:54:45 2012] Error reading totcts from fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 21:54:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 21:54:47 2012] Using photon index=1.80, rate=0.0273, arf fullrun_mos1_xmm0098610201_pi300-10000_pass1_cl_src1.arf
[Tue Jun  5 21:54:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 21:54:47 2012] Updating source flux to 5.5e-13
[Tue Jun  5 21:54:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting