[Wed Aug 22 10:37:55 2012] Detection parameters:
  Position = (258.8, 167.3) = 16 28 16.00 -49 20 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.6 +/- 15.1
  Background counts = 22.7
  Rate = 0.01 +/- 0.001

[Wed Aug 22 10:37:56 2012] Off-axis axis estimate = 9.94'
[Wed Aug 22 13:18:52 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 13:18:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 13:18:52 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Wed Aug 22 13:18:52 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.925
[Wed Aug 22 13:18:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.40"
[Wed Aug 22 18:37:47 2012] fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 22 18:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 22 18:37:47 2012] fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 22 18:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 22 18:37:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 18:37:47 2012] fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 22 18:37:47 2012] fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 22 18:37:47 2012] Fit fullrun_mos2_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 22 18:38:00 2012] Spatial fit model total counts = 355.998000, observed total counts = 356.000000
[Wed Aug 22 18:38:00 2012] Offset between fit and detection position for source 4 = 0.103401 pixels
[Wed Aug 22 18:38:00 2012] 363.628000 total counts/ 280.289000 bgd. counts: snr = 4.977890
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.103401 pixels
  Position = (258.8, 167.3) = 16 28 16.01 -49 20 14.9
  Extent = 6.0 (4.4-8.1)", rotation angle = 0
  Source counts = 83.3 +/- 19.1
  Background counts = 280.3
  Rate = 0.004 +/- 0.0008
[Wed Aug 22 18:38:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 18:38:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 18:38:00 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 18:38:00 2012] Source does appear to be extended
[Wed Aug 22 18:38:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 18:38:00 2012] Deleting source due to low Poisson probability 0.9