[Wed Aug 22 10:37:19 2012] Detection parameters:
  Position = (292.2, 257.6) = 16 28 1.12 -49 13 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 652.7 +/- 40.0
  Background counts = 192.6
  Rate = 0.03 +/- 0.002

[Wed Aug 22 10:37:22 2012] Off-axis axis estimate = 3.00'
[Wed Aug 22 10:54:26 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:54:26 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Aug 22 10:54:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.159
[Wed Aug 22 10:54:26 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.93"
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src4.csv
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src4.csv
[Wed Aug 22 13:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Aug 22 13:18:51 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Aug 22 18:37:57 2012] Spatial fit model total counts = 7312.660000, observed total counts = 7303.000000
[Wed Aug 22 18:37:57 2012] Offset between fit and detection position for source 7 = 7.277999 pixels
[Wed Aug 22 18:37:57 2012] 7125.744000 total counts/ 6580.370000 bgd. counts: snr = 6.723095
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 7.277999 pixels
  Position = (296.5, 251.7) = 16 27 59.22 -49 14 8.1
  Extent = 15.9 (15.8-31.7)", rotation angle = 0
  Source counts = 545.4 +/- 84.4
  Background counts = 6580.4
  Rate = 0.02 +/- 0.004
[Wed Aug 22 18:37:57 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 18:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 18:37:57 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 18:37:57 2012] Source does appear to be extended
[Wed Aug 22 18:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 18:37:57 2012] Source is confused with source 6
[Wed Aug 22 18:37:57 2012] Source is confused with source 44
[Wed Aug 22 18:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 18:42:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 18:42:07 2012] Initial guess for spatial extent in simple fitting = 15.85"
[Wed Aug 22 18:42:07 2012] source mask rpix=3.6, npix_max = 68, mask sum = 72, frac = 1.048
[Wed Aug 22 18:42:07 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 15.85"
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src4.csv
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src4.csv
[Wed Aug 22 20:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Aug 22 20:16:38 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Aug 22 20:25:15 2012] Warning, spatial fit 4 centroid is now closest to src. 44
[Wed Aug 22 20:25:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 20:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 20:25:16 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 20:25:16 2012] Source does appear to be extended
[Wed Aug 22 20:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 20:34:46 2012] XMMSAS src. selection expression = ellipse(25745.656000, 21850.380000, 951.180027, 951.180027, 0.000000, X, Y)
[Wed Aug 22 20:34:46 2012] Writing source region out to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src7_src.reg
[Wed Aug 22 20:34:46 2012] Extracting stamp from image fullrun_mos1_xmm0098610101_pi300-10000_cl_sm2.00.img.gz, (242, 197) - (351, 306)
[Wed Aug 22 20:34:46 2012] XMMSAS bgd. selection expression = annulus(25745.656000, 21850.380000, 1585.300046, 3170.600091, X, Y) && !ellipse(25004.522200, 24515.563600, 4253.064122, 4253.064122, 0.000000, X, Y) && !ellipse(24980.178000, 24192.376000, 3450.696099, 2599.776075, 358.249000, X, Y) && !ellipse(23783.876648, 22382.809723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22440.548645, 22347.492523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26476.482574, 22401.509094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27103.942993, 22400.996674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27981.738159, 24580.635010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21779.648132, 24399.970886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22006.307983, 25519.259552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25345.014000, 21041.618000, 1319.760038, 1319.760038, 0.000000, X, Y)
[Wed Aug 22 20:34:46 2012] Writing fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src7.gif
[Wed Aug 22 20:55:17 2012] Mean detx,y = (2488.64, -1033.89) 
[Wed Aug 22 20:55:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 20:55:28 2012] grppha failed
[Wed Aug 22 20:55:28 2012] Setting source spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src7_src.pi.gz
[Wed Aug 22 20:55:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Aug 22 21:08:23 2012] Updating aperture counts using extracted products
[Wed Aug 22 21:08:23 2012] Error reading totcts from fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src7_src.pi.gz
[Wed Aug 22 21:08:24 2012] No arf file for this source, not re-computing flux
[Wed Aug 22 21:08:24 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Wed Aug 22 21:08:24 2012] Source 7 has no response, skipping
[Wed Aug 22 21:08:25 2012] xmm0098610101/analysis//spectral/fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete