[Wed Aug 22 10:37:19 2012] Detection parameters:
  Position = (258.5, 257.4) = 16 28 16.08 -49 13 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340.5 +/- 38.4
  Background counts = 174.5
  Rate = 0.02 +/- 0.002

[Wed Aug 22 10:37:22 2012] Off-axis axis estimate = 4.15'
[Wed Aug 22 10:54:26 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:54:26 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Wed Aug 22 10:54:26 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830
[Wed Aug 22 10:54:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.50"
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src7.csv
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src7.csv
[Wed Aug 22 13:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Aug 22 13:18:51 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Aug 22 18:37:57 2012] Source 4 is offset by -2.979234 and -8.394385 pixels which is larger than
2 X fitted extent = 5.285701 x 5.285701, not incorporating fit results
[Wed Aug 22 18:37:57 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 18:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 18:37:57 2012] Assessing source extent using major
[Wed Aug 22 18:37:57 2012] Source does appear to be extended
[Wed Aug 22 18:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 18:42:07 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 18:42:07 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Wed Aug 22 18:42:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830
[Wed Aug 22 18:42:07 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.50"
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src7.csv
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src7.csv
[Wed Aug 22 20:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Aug 22 20:16:38 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Aug 22 20:25:15 2012] Source 4 is offset by -2.979211 and -8.394385 pixels which is larger than
2 X fitted extent = 5.285839 x 5.285839, not incorporating fit results
[Wed Aug 22 20:25:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 20:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 20:25:16 2012] Assessing source extent using major
[Wed Aug 22 20:25:16 2012] Source does appear to be extended
[Wed Aug 22 20:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 20:34:46 2012] XMMSAS src. selection expression = ellipse(22440.548645, 22347.492523, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 20:34:46 2012] Writing source region out to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 22 20:34:46 2012] Extracting stamp from image fullrun_mos1_xmm0098610101_pi300-10000_cl_sm2.00.img.gz, (221, 220) - (296, 295)
[Wed Aug 22 20:34:46 2012] XMMSAS bgd. selection expression = annulus(22440.548645, 22347.492523, 1087.500000, 2175.000000, X, Y) && !ellipse(25004.522200, 24515.563600, 4253.064122, 4253.064122, 0.000000, X, Y) && !ellipse(24980.178000, 24192.376000, 3450.696099, 2599.776075, 358.249000, X, Y) && !ellipse(23783.876648, 22382.809723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.656000, 21850.380000, 1268.240036, 1268.240036, 0.000000, X, Y) && !ellipse(21779.648132, 24399.970886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25345.014000, 21041.618000, 1319.760038, 1319.760038, 0.000000, X, Y) && !ellipse(21631.979385, 25006.581360, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 20:34:46 2012] Writing fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src4.gif
[Wed Aug 22 20:56:04 2012] Mean detx,y = (2058.38, 2141.07) 
[Wed Aug 22 20:56:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 20:56:16 2012] grppha failed
[Wed Aug 22 20:56:16 2012] Setting source spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src4_src.pi.gz
[Wed Aug 22 20:56:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 22 21:00:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 21:00:24 2012] rmf not generated due to insufficient counts
[Wed Aug 22 21:08:23 2012] Updating aperture counts using extracted products
[Wed Aug 22 21:08:23 2012] Error reading totcts from fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src4_src.pi.gz
[Wed Aug 22 21:08:24 2012] No arf file for this source, not re-computing flux
[Wed Aug 22 21:08:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 22 21:08:25 2012] xmm0098610101/analysis//spectral/fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete