[Wed Aug 22 10:37:21 2012] Detection parameters:
  Position = (335.8, 283.1) = 16 27 41.75 -49 11 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.7 +/- 20.6
  Background counts = 95.1
  Rate = 0.008 +/- 0.001

[Wed Aug 22 10:37:22 2012] Off-axis axis estimate = 2.93'
[Wed Aug 22 10:54:26 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:54:26 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Wed Aug 22 10:54:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.747
[Wed Aug 22 10:54:26 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.89"
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src19.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src19.csv
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src19.csv
[Wed Aug 22 13:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Aug 22 13:18:51 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Aug 22 18:37:57 2012] Spatial fit model total counts = 1452.000000, observed total counts = 1452.000000
[Wed Aug 22 18:37:57 2012] Offset between fit and detection position for source 35 = 0.390201 pixels
[Wed Aug 22 18:37:57 2012] 1406.241000 total counts/ 1294.480000 bgd. counts: snr = 3.106294
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.390201 pixels
  Position = (336.2, 283.1) = 16 27 41.58 -49 11 51.3
  Extent = 7.8 (5.0-11.2)", rotation angle = 0
  Source counts = 111.8 +/- 37.5
  Background counts = 1294.5
  Rate = 0.005 +/- 0.002
[Wed Aug 22 18:37:57 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 18:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 18:37:57 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 18:37:57 2012] Source does appear to be extended
[Wed Aug 22 18:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 18:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 18:42:07 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Aug 22 18:42:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.952
[Wed Aug 22 18:42:07 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.79"
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src17.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src17.csv
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src17.csv
[Wed Aug 22 20:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Aug 22 20:16:38 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Aug 22 20:25:15 2012] Warning, spatial fit 17 centroid is now closest to src. 34
[Wed Aug 22 20:25:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 20:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 20:25:16 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 20:25:16 2012] Source does appear to be extended
[Wed Aug 22 20:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 20:25:16 2012] Deleting source due to low Poisson probability 0.9