[Wed Aug 22 10:37:21 2012] Detection parameters:
  Position = (355.3, 283.5) = 16 27 33.12 -49 11 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 14.1
  Background counts = 58.1
  Rate = 0.004 +/- 0.0009

[Wed Aug 22 10:37:22 2012] Off-axis axis estimate = 4.26'
[Wed Aug 22 10:54:26 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:54:26 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Wed Aug 22 10:54:26 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Wed Aug 22 10:54:26 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.56"
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src39.ximg exists
[Wed Aug 22 13:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src39.csv
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Aug 22 13:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src39.csv
[Wed Aug 22 13:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:18:52 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Aug 22 13:18:52 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Aug 22 13:18:52 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Aug 22 18:37:57 2012] Source 31 is offset by 9.013118 and 0.389658 pixels which is larger than
2 X fitted extent = 7.634943 x 3.735421, not incorporating fit results
[Wed Aug 22 18:37:57 2012] Spatial fit model total counts = 723.686000, observed total counts = 670.000000
[Wed Aug 22 18:37:57 2012] Offset between fit and detection position for source 31 = 0.610043 pixels
[Wed Aug 22 18:37:57 2012] 643.544000 total counts/ 476.842000 bgd. counts: snr = 7.634025
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.610043 pixels
  Position = (354.7, 283.5) = 16 27 33.39 -49 11 49.4
  Extent = 13.4 (7.4-17.1)", rotation angle = 0
  Source counts = 166.7 +/- 25.4
  Background counts = 476.8
  Rate = 0.007 +/- 0.001
[Wed Aug 22 18:37:57 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 18:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 18:37:57 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 18:37:57 2012] Source does appear to be extended
[Wed Aug 22 18:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 18:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 18:42:07 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Wed Aug 22 18:42:07 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.954
[Wed Aug 22 18:42:07 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 13.42"
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src29.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src29.csv
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src29.csv
[Wed Aug 22 20:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Aug 22 20:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Aug 22 20:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Aug 22 20:16:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 20:25:16 2012] Warning, spatial fit 29 centroid is now closest to src. 34
[Wed Aug 22 20:25:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 20:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 20:25:16 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 20:25:16 2012] Source does appear to be extended
[Wed Aug 22 20:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 20:34:46 2012] XMMSAS src. selection expression = ellipse(30807.949000, 24620.263800, 804.930023, 804.930023, 0.000000, X, Y)
[Wed Aug 22 20:34:46 2012] Writing source region out to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src31_src.reg
[Wed Aug 22 20:34:46 2012] Extracting stamp from image fullrun_mos1_xmm0098610101_pi300-10000_cl_sm2.00.img.gz, (308, 237) - (401, 330)
[Wed Aug 22 20:34:46 2012] XMMSAS bgd. selection expression = annulus(30807.949000, 24620.263800, 1341.550039, 2683.100077, X, Y) && !ellipse(25004.522200, 24515.563600, 4253.064122, 4253.064122, 0.000000, X, Y) && !ellipse(24980.178000, 24192.376000, 3450.696099, 2599.776075, 358.249000, X, Y) && !ellipse(30205.561000, 23111.542400, 391.705611, 391.705611, 0.000000, X, Y) && !ellipse(27981.738159, 24580.635010, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 20:34:46 2012] Writing fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src31.gif
[Wed Aug 22 20:59:51 2012] Mean detx,y = (-10.48, -6020.42) 
[Wed Aug 22 20:59:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 21:00:21 2012] grppha failed
[Wed Aug 22 21:00:21 2012] Setting source spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src31_src.pi.gz
[Wed Aug 22 21:00:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Aug 22 21:08:24 2012] Updating aperture counts using extracted products
[Wed Aug 22 21:08:24 2012] Error reading totcts from fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src31_src.pi.gz
[Wed Aug 22 21:08:24 2012] No arf file for this source, not re-computing flux
[Wed Aug 22 21:08:24 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Wed Aug 22 21:08:24 2012] Source 31 has no response, skipping
[Wed Aug 22 21:08:25 2012] xmm0098610101/analysis//spectral/fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete