[Wed Aug 22 10:37:19 2012] Detection parameters:
  Position = (422.6, 273.8) = 16 27 3.23 -49 12 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 581.6 +/- 29.5
  Background counts = 16.2
  Rate = 0.02 +/- 0.001

[Wed Aug 22 10:37:22 2012] Off-axis axis estimate = 9.18'
[Wed Aug 22 10:54:26 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:54:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 10:54:26 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Wed Aug 22 10:54:26 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Wed Aug 22 10:54:26 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.02"
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src6.csv
[Wed Aug 22 13:18:50 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Aug 22 13:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src6.csv
[Wed Aug 22 13:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Aug 22 13:18:51 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Aug 22 18:37:57 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.823334 pixels away
[Wed Aug 22 18:37:57 2012] Spatial fit model total counts = 629.198000, observed total counts = 629.000000
[Wed Aug 22 18:37:57 2012] Offset between fit and detection position for source 2 = 0.850038 pixels
[Wed Aug 22 18:37:57 2012] Warning, changing simple spatial fit ID from 6 to 45
[Wed Aug 22 18:37:57 2012] 609.265000 total counts/ 277.931000 bgd. counts: snr = 19.874559
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.850038 pixels
  Position = (423.4, 273.5) = 16 27 2.89 -49 12 32.6
  Extent = 6.7 (5.4-7.8)", rotation angle = 0
  Source counts = 331.3 +/- 24.7
  Background counts = 277.9
  Rate = 0.01 +/- 0.001
[Wed Aug 22 18:37:57 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 18:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 18:37:57 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 18:37:57 2012] Source does appear to be extended
[Wed Aug 22 18:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 18:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 18:42:07 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Wed Aug 22 18:42:07 2012] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.188
[Wed Aug 22 18:42:07 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.75"
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src6.csv
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src6.csv
[Wed Aug 22 20:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Aug 22 20:16:38 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Aug 22 20:25:15 2012] Spatial fit model total counts = 729.998000, observed total counts = 730.000000
[Wed Aug 22 20:25:15 2012] Offset between fit and detection position for source 2 = 0.838138 pixels
[Wed Aug 22 20:25:15 2012] 730.656000 total counts/ 315.679000 bgd. counts: snr = 23.356146
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.838138 pixels
  Position = (422.6, 273.6) = 16 27 3.26 -49 12 32.2
  Extent = 6.2 (5.7-6.9)", rotation angle = 0
  Source counts = 415.0 +/- 27.0
  Background counts = 315.7
  Rate = 0.02 +/- 0.001
[Wed Aug 22 20:25:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 20:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 20:25:16 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 20:25:16 2012] Source does appear to be extended
[Wed Aug 22 20:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 20:34:46 2012] XMMSAS src. selection expression = ellipse(36713.447400, 23751.097600, 374.943611, 374.943611, 0.000000, X, Y)
[Wed Aug 22 20:34:46 2012] Writing source region out to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug 22 20:34:46 2012] Extracting stamp from image fullrun_mos1_xmm0098610101_pi300-10000_cl_sm2.00.img.gz, (401, 252) - (444, 295)
[Wed Aug 22 20:34:46 2012] XMMSAS bgd. selection expression = annulus(36713.447400, 23751.097600, 624.906018, 1249.812036, X, Y)
[Wed Aug 22 20:34:46 2012] Writing fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src2.gif
[Wed Aug 22 20:55:49 2012] Mean detx,y = (971.03, -12125.02) 
[Wed Aug 22 20:55:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 20:55:58 2012] grppha failed
[Wed Aug 22 20:55:58 2012] Setting source spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src2_src.pi.gz
[Wed Aug 22 20:55:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Aug 22 21:08:23 2012] Updating aperture counts using extracted products
[Wed Aug 22 21:08:23 2012] Error reading totcts from fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src2_src.pi.gz
[Wed Aug 22 21:08:24 2012] No arf file for this source, not re-computing flux
[Wed Aug 22 21:08:24 2012] Source 2 has no response, skipping
[Wed Aug 22 21:08:25 2012] xmm0098610101/analysis//spectral/fullrun_mos1_xmm0098610101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete