[Wed Aug 22 10:37:20 2012] Detection parameters:
  Position = (259.8, 320.3) = 16 28 15.50 -49 9 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.9 +/- 19.2
  Background counts = 120.9
  Rate = 0.005 +/- 0.0009

[Wed Aug 22 10:37:22 2012] Off-axis axis estimate = 3.22'
[Wed Aug 22 10:54:26 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:54:26 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Wed Aug 22 10:54:26 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.134
[Wed Aug 22 10:54:26 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.04"
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src33.ximg exists
[Wed Aug 22 13:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src33.csv
[Wed Aug 22 13:18:51 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Aug 22 13:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src33.csv
[Wed Aug 22 13:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:18:52 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Aug 22 13:18:52 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Aug 22 13:18:52 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Aug 22 18:37:57 2012] Spatial fit model total counts = 2953.650000, observed total counts = 2949.000000
[Wed Aug 22 18:37:57 2012] Offset between fit and detection position for source 18 = 2.885690 pixels
[Wed Aug 22 18:37:57 2012] Warning, changing simple spatial fit ID from 33 to 18
[Wed Aug 22 18:37:57 2012] 2782.111000 total counts/ 2659.070000 bgd. counts: snr = 2.386080
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.885690 pixels
  Position = (256.9, 320.2) = 16 28 16.78 -49 9 9.9
  Extent = 15.5 (15.5-31.1)" x 7.1 (4.4-14.6)", rotation angle = 339
  Source counts = 123.0 +/- 52.7
  Background counts = 2659.1
  Rate = 0.005 +/- 0.002
[Wed Aug 22 18:37:57 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 18:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 18:37:57 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 18:37:57 2012] Source does appear to be extended
[Wed Aug 22 18:37:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Wed Aug 22 18:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 18:42:07 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Aug 22 18:42:07 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Wed Aug 22 18:42:07 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 11.34"
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src27.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src27.csv
[Wed Aug 22 20:16:37 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Aug 22 20:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src27.csv
[Wed Aug 22 20:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Aug 22 20:16:38 2012] fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Aug 22 20:16:38 2012] Fit fullrun_mos1_xmm0098610101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Aug 22 20:25:16 2012] Warning, spatial fit 27 centroid is now closest to src. 28
[Wed Aug 22 20:25:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 20:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 20:25:16 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 20:25:16 2012] Source does appear to be extended
[Wed Aug 22 20:25:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Wed Aug 22 20:25:16 2012] Deleting source due to low Poisson probability 0.9