[Sat Sep  8 11:57:38 2012] Detection parameters:
  Position = (370.6, 262.2) = 13 48 31.34 26 31 10.4
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 69.3 +/- 16.2
  Background counts = 382.7
  Rate = 0.003 +/- 0.0006

[Sat Sep  8 11:57:38 2012] Off-axis axis estimate = 5.86'
[Sat Sep  8 11:59:01 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 11:59:01 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Sat Sep  8 11:59:01 2012] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.640
[Sat Sep  8 11:59:01 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.36"
[Sat Sep  8 14:19:14 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src61.ximg exists
[Sat Sep  8 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src61.csv
[Sat Sep  8 14:19:14 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat Sep  8 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src61.csv
[Sat Sep  8 14:19:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:19:15 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat Sep  8 14:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sat Sep  8 14:19:15 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Sep  8 14:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sat Sep  8 14:19:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:19:28 2012] Source 61 is offset by 3.867196 and -7.629234 pixels which is larger than
2 X fitted extent = 1.034947 x 1.034947, not incorporating fit results
[Sat Sep  8 14:19:28 2012] Spatial fit model total counts = 1206.310000, observed total counts = 1966.000000
[Sat Sep  8 14:19:28 2012] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Sep  8 14:19:28 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 14:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 14:19:28 2012] Assessing source extent using major
[Sat Sep  8 14:19:28 2012] Source does appear to be extended
[Sat Sep  8 14:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 14:19:28 2012] Deleting source due to low Poisson probability 0.8