[Sat Sep  8 11:57:37 2012] Detection parameters:
  Position = (304.2, 321.0) = 13 48 52.86 26 35 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29700.6 +/- 214.6
  Background counts = 581.4
  Rate = 0.6 +/- 0.004

[Sat Sep  8 11:57:38 2012] Off-axis axis estimate = 1.69'
[Sat Sep  8 11:59:01 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 11:59:01 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Sep  8 11:59:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sat Sep  8 11:59:01 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.27"
[Sat Sep  8 14:19:13 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Sep  8 14:19:13 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Sep  8 14:19:13 2012] Fit fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Sep  8 14:19:14 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Sep  8 14:19:14 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Sep  8 14:19:14 2012] Fit fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Sep  8 14:19:28 2012] Spatial fit model total counts = 84450.800000, observed total counts = 93832.000000
[Sat Sep  8 14:19:28 2012] Offset between fit and detection position for source 2 = 0.452296 pixels
[Sat Sep  8 14:19:28 2012] 83679.600000 total counts/ 25600.000000 bgd. counts: snr = 362.997500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.452296 pixels
  Position = (304.7, 320.8) = 13 48 52.72 26 35 28.3
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 58079.6 +/- 289.3
  Background counts = 25600.0
  Rate = 1 +/- 0.006
[Sat Sep  8 14:19:28 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 14:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 14:19:28 2012] Assessing source extent using major axis lower bound
[Sat Sep  8 14:19:28 2012] Source does appear to be extended
[Sat Sep  8 14:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 14:19:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep  8 14:19:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  8 14:19:32 2012] Initial guess for spatial extent in simple fitting = 14.54"
[Sat Sep  8 14:19:32 2012] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.948
[Sat Sep  8 14:19:32 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 14.54"
[Sat Sep  8 15:53:25 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Sep  8 15:53:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src2.csv
[Sat Sep  8 15:53:25 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Sep  8 15:53:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src2.csv
[Sat Sep  8 15:53:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 15:53:25 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Sep  8 15:53:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Sep  8 15:53:25 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Sep  8 15:53:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Sep  8 15:53:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 15:53:32 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Sat Sep  8 15:53:32 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 15:53:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 15:53:32 2012] Assessing source extent using major axis lower bound
[Sat Sep  8 15:53:32 2012] Source does appear to be extended
[Sat Sep  8 15:53:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 15:53:36 2012] Counts = 58079.600000, rescaling region sizes by 3.000000
[Sat Sep  8 15:53:36 2012] XMMSAS src. selection expression = ellipse(26456.360600, 27861.024380, 2617.902075, 2617.902075, 0.000000, X, Y)
[Sat Sep  8 15:53:36 2012] Writing source region out to fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src2_src.reg
[Sat Sep  8 15:53:36 2012] Extracting stamp from image fullrun_mos1_xmm0097820101_pi300-10000_cl_sm2.00.img.gz, (154, 170) - (455, 471)
[Sat Sep  8 15:53:36 2012] XMMSAS bgd. selection expression = annulus(26456.360600, 27861.024380, 13089.510377, 26179.020753, X, Y) && !ellipse(31179.941400, 22687.073200, 1399.670440, 1094.860832, 330.580276, X, Y) && !ellipse(26002.389923, 29730.186462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23943.114685, 41764.905914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13987.666824, 35989.083496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26740.015472, 33095.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.106628, 32942.992279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26025.735596, 32669.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.287323, 32388.845184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25686.242310, 32249.700409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25179.490143, 31959.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.718000, 31884.968000, 1400.936040, 1400.936040, 0.000000, X, Y) && !ellipse(28530.590000, 30764.172000, 1434.040041, 1434.040041, 0.000000, X, Y) && !ellipse(27359.294000, 30612.344000, 1400.936040, 1400.936040, 0.000000, X, Y) && !ellipse(27651.558716, 12056.780838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29181.941498, 30138.750336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29773.426000, 30142.454600, 1384.512040, 1384.512040, 0.000000, X, Y) && !ellipse(29839.790000, 29092.530000, 1279.232037, 1279.232037, 0.000000, X, Y) && !ellipse(29177.757172, 28655.268646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28970.146000, 27746.379000, 1290.976037, 1290.976037, 0.000000, X, Y) && !ellipse(23410.895477, 27647.018616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24000.593414, 26329.733795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.170380, 25553.108521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29273.080000, 24656.920000, 1223.160035, 1223.160035, 0.000000, X, Y) && !ellipse(27767.421539, 24669.358124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.333893, 24759.193695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25209.830000, 24908.808000, 1067.384031, 1067.384031, 0.000000, X, Y) && !ellipse(28146.886000, 23440.250000, 1218.984035, 1218.984035, 0.000000, X, Y) && !ellipse(26899.524323, 23795.386200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31412.907200, 11812.832600, 679.236020, 268.536008, 173.566422, X, Y)
[Sat Sep  8 15:53:36 2012] Writing fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src2.gif
[Sat Sep  8 15:56:15 2012] Mean detx,y = (339.83, -135.19) 
[Sat Sep  8 15:56:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  8 16:04:03 2012] grppha failed
[Sat Sep  8 16:04:03 2012] Setting source spectrum file to fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src2_src.pi.gz
[Sat Sep  8 16:04:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Sep  8 16:16:00 2012] Updating aperture counts using extracted products
[Sat Sep  8 16:16:00 2012] Error reading totcts from fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src2_src.pi.gz
[Sat Sep  8 16:16:01 2012] No arf file for this source, not re-computing flux
[Sat Sep  8 16:16:01 2012] Source 2 has no response, skipping
[Sat Sep  8 16:16:02 2012] xmm0097820101/analysis//spectral/fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete