[Sat Sep  8 11:57:37 2012] Detection parameters:
  Position = (359.0, 261.3) = 13 48 35.12 26 31 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15204.3 +/- 147.4
  Background counts = 112.2
  Rate = 0.4 +/- 0.004

[Sat Sep  8 11:57:38 2012] Off-axis axis estimate = 5.15'
[Sat Sep  8 11:59:01 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 11:59:01 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Sat Sep  8 11:59:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.060
[Sat Sep  8 11:59:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.00"
[Sat Sep  8 14:19:13 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep  8 14:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src1.csv
[Sat Sep  8 14:19:13 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep  8 14:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src1.csv
[Sat Sep  8 14:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:19:14 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep  8 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Sep  8 14:19:14 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep  8 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Sep  8 14:19:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097820101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:19:28 2012] Warning, spatial fit 1 centroid is now closest to src. 61
[Sat Sep  8 14:19:28 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 14:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 14:19:28 2012] Assessing source extent using major
[Sat Sep  8 14:19:28 2012] Source does appear to be extended
[Sat Sep  8 14:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 14:19:32 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 14:19:32 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Sat Sep  8 14:19:32 2012] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.060
[Sat Sep  8 14:19:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.00"
[Sat Sep  8 15:53:24 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep  8 15:53:25 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep  8 15:53:25 2012] Fit fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Sep  8 15:53:25 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep  8 15:53:25 2012] fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep  8 15:53:25 2012] Fit fullrun_mos1_xmm0097820101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep  8 15:53:32 2012] Spatial fit model total counts = 14601.200000, observed total counts = 14275.000000
[Sat Sep  8 15:53:32 2012] Offset between fit and detection position for source 1 = 0.075790 pixels
[Sat Sep  8 15:53:32 2012] 14667.180000 total counts/ 3943.280000 bgd. counts: snr = 170.774864
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.075790 pixels
  Position = (358.9, 261.3) = 13 48 35.13 26 31 9.5
  Extent = 5.8 (5.7-6.0)" x 4.6 (4.5-4.7)", rotation angle = 331 (327-334) degrees
  Source counts = 10723.9 +/- 121.1
  Background counts = 3943.3
  Rate = 0.2 +/- 0.002
[Sat Sep  8 15:53:32 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 15:53:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 15:53:32 2012] Assessing source extent using major axis lower bound
[Sat Sep  8 15:53:32 2012] Source does appear to be extended
[Sat Sep  8 15:53:32 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Sat Sep  8 15:53:36 2012] Counts = 10723.900000, rescaling region sizes by 3.000000
[Sat Sep  8 15:53:36 2012] XMMSAS src. selection expression = ellipse(31179.941400, 22687.073200, 1049.752830, 821.145624, 330.580276, X, Y)
[Sat Sep  8 15:53:36 2012] Writing source region out to fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep  8 15:53:36 2012] Extracting stamp from image fullrun_mos1_xmm0097820101_pi300-10000_cl_sm2.00.img.gz, (299, 201) - (419, 322)
[Sat Sep  8 15:53:36 2012] XMMSAS bgd. selection expression = annulus(31179.941400, 22687.073200, 5248.764151, 10497.528302, X, Y) && !ellipse(26456.360600, 27861.024380, 3490.536100, 3490.536100, 0.000000, X, Y) && !ellipse(26002.389923, 29730.186462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26740.015472, 33095.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.106628, 32942.992279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26025.735596, 32669.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.287323, 32388.845184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25686.242310, 32249.700409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25179.490143, 31959.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.718000, 31884.968000, 1400.936040, 1400.936040, 0.000000, X, Y) && !ellipse(28530.590000, 30764.172000, 1434.040041, 1434.040041, 0.000000, X, Y) && !ellipse(27359.294000, 30612.344000, 1400.936040, 1400.936040, 0.000000, X, Y) && !ellipse(27651.558716, 12056.780838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29181.941498, 30138.750336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29773.426000, 30142.454600, 1384.512040, 1384.512040, 0.000000, X, Y) && !ellipse(29839.790000, 29092.530000, 1279.232037, 1279.232037, 0.000000, X, Y) && !ellipse(29177.757172, 28655.268646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28970.146000, 27746.379000, 1290.976037, 1290.976037, 0.000000, X, Y) && !ellipse(23410.895477, 27647.018616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24000.593414, 26329.733795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.170380, 25553.108521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29273.080000, 24656.920000, 1223.160035, 1223.160035, 0.000000, X, Y) && !ellipse(27767.421539, 24669.358124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.333893, 24759.193695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25209.830000, 24908.808000, 1067.384031, 1067.384031, 0.000000, X, Y) && !ellipse(28146.886000, 23440.250000, 1218.984035, 1218.984035, 0.000000, X, Y) && !ellipse(26899.524323, 23795.386200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31412.907200, 11812.832600, 679.236020, 268.536008, 173.566422, X, Y)
[Sat Sep  8 15:53:36 2012] Writing fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src1.gif
[Sat Sep  8 15:53:45 2012] Mean detx,y = (-6237.30, 2451.43) 
[Sat Sep  8 15:53:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  8 15:55:54 2012] grppha failed
[Sat Sep  8 15:55:54 2012] Setting source spectrum file to fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  8 15:55:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep  8 16:16:00 2012] Updating aperture counts using extracted products
[Sat Sep  8 16:16:00 2012] Error reading totcts from fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  8 16:16:01 2012] No arf file for this source, not re-computing flux
[Sat Sep  8 16:16:01 2012] Source 1 has no response, skipping
[Sat Sep  8 16:16:02 2012] xmm0097820101/analysis//spectral/fullrun_mos1_xmm0097820101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete