[Thu Jun  7 23:50:34 2012] Detection parameters:
  Position = (413.1, 344.9) = 23 22 7.38 58 51 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.5 +/- 22.5
  Background counts = 137.0
  Rate = 0.003 +/- 0.0006

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 8.97'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.994
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 10.91"
[Sat Jun  9 20:57:10 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src98.ximg exists
[Sat Jun  9 20:57:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src98.csv
[Sat Jun  9 20:57:10 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src98_1.ximg exists
[Sat Jun  9 20:57:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src98.csv
[Sat Jun  9 20:57:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:14 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sat Jun  9 20:57:14 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sat Jun  9 20:57:14 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly