[Thu Jun  7 23:50:33 2012] Detection parameters:
  Position = (213.5, 159.9) = 23 23 59.03 58 38 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.1 +/- 21.6
  Background counts = 147.0
  Rate = 0.003 +/- 0.0005

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 11.78'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.946
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 12.32"
[Sat Jun  9 20:57:09 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src78.ximg exists
[Sat Jun  9 20:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src78.csv
[Sat Jun  9 20:57:09 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src78_1.ximg exists
[Sat Jun  9 20:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src78.csv
[Sat Jun  9 20:57:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Sat Jun  9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Sat Jun  9 20:57:13 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly