[Thu Jun 7 23:50:32 2012] Detection parameters: Position = (327.0, 372.9) = 23 22 55.63 58 53 58.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 415.4 +/- 44.0 Background counts = 663.3 Rate = 0.01 +/- 0.001 [Thu Jun 7 23:50:43 2012] Off-axis axis estimate = 5.78' [Fri Jun 8 00:19:06 2012] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 9.32" [Fri Jun 8 00:19:06 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.289 [Fri Jun 8 00:19:06 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 9.32" [Sat Jun 9 20:57:09 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src71.ximg exists [Sat Jun 9 20:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src71.csv [Sat Jun 9 20:57:09 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src71_1.ximg exists [Sat Jun 9 20:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src71.csv [Sat Jun 9 20:57:09 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src71_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src71.ximg exists [Sat Jun 9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists [Sat Jun 9 20:57:13 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly