[Thu Jun 7 23:50:32 2012] Detection parameters: Position = (376.2, 378.1) = 23 22 28.00 58 54 21.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 426.2 +/- 36.1 Background counts = 281.0 Rate = 0.01 +/- 0.0009 [Thu Jun 7 23:50:43 2012] Off-axis axis estimate = 8.07' [Fri Jun 8 00:19:06 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 10.46" [Fri Jun 8 00:19:06 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066 [Fri Jun 8 00:19:06 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 10.46" [Sat Jun 9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src63.ximg exists [Sat Jun 9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src63.csv [Sat Jun 9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src63_1.ximg exists [Sat Jun 9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src63.csv [Sat Jun 9 20:57:08 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src63_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src63.ximg exists [Sat Jun 9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists [Sat Jun 9 20:57:13 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly