[Thu Jun  7 23:50:32 2012] Detection parameters:
  Position = (271.2, 379.0) = 23 23 26.96 58 54 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.1 +/- 24.8
  Background counts = 143.3
  Rate = 0.005 +/- 0.0006

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 6.16'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.039
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.51"
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src61.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src61.csv
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src61.csv
[Sat Jun  9 20:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat Jun  9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Jun  9 20:57:13 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly