[Thu Jun  7 23:50:32 2012] Detection parameters:
  Position = (248.1, 380.9) = 23 23 39.92 58 54 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.4 +/- 21.9
  Background counts = 119.5
  Rate = 0.004 +/- 0.0005

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 7.00'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 9.93"
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src59.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src59.csv
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src59_1.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src59.csv
[Sat Jun  9 20:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sat Jun  9 20:57:13 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sat Jun  9 20:57:13 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly