[Thu Jun 7 23:50:31 2012] Detection parameters: Position = (387.0, 389.1) = 23 22 21.94 58 55 9.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 499.0 +/- 37.3 Background counts = 251.6 Rate = 0.01 +/- 0.0009 [Thu Jun 7 23:50:43 2012] Off-axis axis estimate = 9.19' [Fri Jun 8 00:19:06 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 11.02" [Fri Jun 8 00:19:06 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978 [Fri Jun 8 00:19:06 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 11.02" [Sat Jun 9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src55.ximg exists [Sat Jun 9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src55.csv [Sat Jun 9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src55_1.ximg exists [Sat Jun 9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src55.csv [Sat Jun 9 20:57:08 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Sat Jun 9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Sat Jun 9 20:57:12 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly