[Thu Jun  7 23:50:31 2012] Detection parameters:
  Position = (345.7, 392.1) = 23 22 45.13 58 55 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 390.5 +/- 43.7
  Background counts = 637.8
  Rate = 0.01 +/- 0.001

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 7.60'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.107
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 10.23"
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src47.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src47.csv
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src47.csv
[Sat Jun  9 20:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Jun  9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Jun  9 20:57:12 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly