[Thu Jun  7 23:50:30 2012] Detection parameters:
  Position = (333.8, 396.0) = 23 22 51.79 58 55 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 363.9 +/- 40.8
  Background counts = 587.4
  Rate = 0.009 +/- 0.001

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 7.52'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.19"
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src42.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src42.csv
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src42.csv
[Sat Jun  9 20:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Jun  9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Jun  9 20:57:12 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly