[Thu Jun  7 23:50:30 2012] Detection parameters:
  Position = (359.0, 409.0) = 23 22 37.64 58 56 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 670.7 +/- 47.1
  Background counts = 455.6
  Rate = 0.02 +/- 0.001

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 9.14'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 11.00"
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src37.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src37.csv
[Sat Jun  9 20:57:08 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Jun  9 20:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src37.csv
[Sat Jun  9 20:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Jun  9 20:57:12 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Jun  9 20:57:12 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly