[Thu Jun  7 23:50:29 2012] Detection parameters:
  Position = (357.2, 418.1) = 23 22 38.63 58 57 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 641.9 +/- 44.1
  Background counts = 357.4
  Rate = 0.02 +/- 0.001

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 9.66'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 11.26"
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src30.csv
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src30.csv
[Sat Jun  9 20:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun  9 20:57:11 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly