[Thu Jun  7 23:50:29 2012] Detection parameters:
  Position = (385.4, 418.8) = 23 22 22.76 58 57 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 401.6 +/- 31.7
  Background counts = 359.8
  Rate = 0.01 +/- 0.0008

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 10.77'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.81"
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src27.csv
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src27.csv
[Sat Jun  9 20:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun  9 20:57:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun  9 20:57:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jun  9 20:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes