[Thu Jun  7 23:50:29 2012] Detection parameters:
  Position = (376.0, 425.9) = 23 22 28.05 58 57 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 956.1 +/- 53.7
  Background counts = 341.0
  Rate = 0.02 +/- 0.001

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 10.82'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Fri Jun  8 00:19:06 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.843
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.84"
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src25.csv
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src25.csv
[Sat Jun  9 20:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun  9 20:57:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun  9 20:57:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun  9 20:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes