[Thu Jun  7 23:50:29 2012] Detection parameters:
  Position = (143.9, 179.0) = 23 24 37.85 58 39 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1555.6 +/- 58.1
  Background counts = 246.4
  Rate = 0.04 +/- 0.001

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 14.16'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 13.51"
[Fri Jun  8 00:19:06 2012] source mask rpix=3.1, npix_max = 51, mask sum = 64, frac = 1.231
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.51"
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src24.csv
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src24.csv
[Sat Jun  9 20:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jun  9 20:57:11 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly