[Thu Jun  7 23:50:29 2012] Detection parameters:
  Position = (136.9, 171.0) = 23 24 41.74 58 39 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1913.0 +/- 61.3
  Background counts = 207.2
  Rate = 0.05 +/- 0.002

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 14.92'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 13.89"
[Fri Jun  8 00:19:06 2012] source mask rpix=3.2, npix_max = 54, mask sum = 61, frac = 1.119
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.89"
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src20.csv
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src20.csv
[Sat Jun  9 20:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun  9 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  9 20:57:11 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun  9 20:57:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  9 20:57:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes