[Thu Jun  7 23:50:28 2012] Detection parameters:
  Position = (279.0, 324.0) = 23 23 22.57 58 50 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183408.2 +/- 526.8
  Background counts = 127.3
  Rate = 5 +/- 0.01

[Thu Jun  7 23:50:43 2012] Off-axis axis estimate = 2.33'
[Fri Jun  8 00:19:06 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Fri Jun  8 00:19:06 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Fri Jun  8 00:19:06 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.59"
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src17.csv
[Sat Jun  9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun  9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src17.csv
[Sat Jun  9 20:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:57:10 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun  9 20:57:10 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun  9 20:57:10 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly