[Thu Jun 7 23:50:28 2012] Detection parameters: Position = (297.0, 294.1) = 23 23 12.50 58 48 15.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 108362.3 +/- 387.9 Background counts = 147.2 Rate = 3 +/- 0.01 [Thu Jun 7 23:50:43 2012] Off-axis axis estimate = 0.33' [Fri Jun 8 00:19:06 2012] Using EEF radius (= 6.60 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 00:19:06 2012] Initial guess for spatial extent in simple fitting = 6.60" [Fri Jun 8 00:19:06 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.984 [Fri Jun 8 00:19:06 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 6.60" [Sat Jun 9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src12.ximg exists [Sat Jun 9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src12.csv [Sat Jun 9 20:57:07 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src12_1.ximg exists [Sat Jun 9 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src12.csv [Sat Jun 9 20:57:07 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 9 20:57:10 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists [Sat Jun 9 20:57:10 2012] fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists [Sat Jun 9 20:57:10 2012] Fit fullrun_pn_xmm0097610801_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly