[Tue May  7 00:58:02 2013] Detection parameters:
  Position = (209.9, 302.0) = 23 24 1.21 58 48 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.6 +/- 29.4
  Background counts = 317.5
  Rate = 0.006 +/- 0.001

[Tue May  7 00:58:08 2013] Off-axis axis estimate = 6.43'
[Tue May  7 00:58:55 2013] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Tue May  7 00:58:55 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Tue May  7 00:58:55 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.220
[Tue May  7 00:58:55 2013] Giving source the simple spatial ID 92 for pass 0, mean size = 9.64"
[Tue May  7 00:58:58 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src92.ximg exists
[Tue May  7 00:58:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src92.csv
[Tue May  7 00:58:58 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src92_1.ximg exists
[Tue May  7 00:58:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src92.csv
[Tue May  7 00:58:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 00:59:03 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Tue May  7 00:59:03 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Tue May  7 00:59:03 2013] Fit fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Tue May  7 05:32:00 2013] Spatial fit model total counts = 5108.220000, observed total counts = 5102.000000
[Tue May  7 05:32:00 2013] Offset between fit and detection position for source 94 = 9.318321 pixels
[Tue May  7 05:32:00 2013] 5236.863000 total counts/ 4997.520000 bgd. counts: snr = 3.385661
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 9.318321 pixels
  Position = (218.4, 298.2) = 23 23 56.45 58 48 34.6
  Extent = 18.6 (17.1-19.3)", rotation angle = 0
  Source counts = 239.3 +/- 72.4
  Background counts = 4997.5
  Rate = 0.01 +/- 0.003
[Tue May  7 05:32:00 2013] Vigneting correction estimate = 1.000000
[Tue May  7 05:32:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 05:32:00 2013] Assessing source extent using major axis lower bound
[Tue May  7 05:32:00 2013] Source does appear to be extended
[Tue May  7 05:32:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 05:32:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 05:32:32 2013] Initial guess for spatial extent in simple fitting = 18.57"
[Tue May  7 05:32:32 2013] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.989
[Tue May  7 05:32:32 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 18.57"
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src74.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src74.csv
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src74_1.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src74.csv
[Wed May  8 21:22:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src74.csv
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src74.csv
[Wed May  8 21:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:42:05 2013] Warning, spatial fit 74 centroid is now closest to src. 17
[Sun May 12 19:42:05 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:42:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:42:05 2013] Assessing source extent using major axis lower bound
[Sun May 12 19:42:05 2013] Source does appear to be extended
[Sun May 12 19:42:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 19:42:39 2013] XMMSAS src. selection expression = ellipse(18949.322000, 25892.104000, 1114.198465, 1114.198465, 0.000000, X, Y)
[Sun May 12 19:42:39 2013] Writing source region out to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src94_src.reg
[Sun May 12 19:42:39 2013] Extracting stamp from image fullrun_pn_xmm0097610501_pi300-10000_cl_sm2.00.img.gz, (154, 234) - (282, 362)
[Sun May 12 19:42:39 2013] XMMSAS bgd. selection expression = annulus(18949.322000, 25892.104000, 1856.997441, 3713.994882, X, Y) && !ellipse(21882.610800, 25332.475600, 3918.480113, 3918.480113, 0.000000, X, Y) && !ellipse(23284.559800, 28087.121600, 3772.896109, 3772.896109, 0.000000, X, Y) && !ellipse(24332.808800, 28081.472660, 7278.912209, 5895.624170, 12.266000, X, Y) && !ellipse(22259.677429, 27615.229950, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20569.021149, 26994.709778, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21803.648270, 26763.764709, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24657.864502, 27013.722443, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23612.470612, 26577.357758, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21367.529175, 26049.206055, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22245.162384, 26252.764496, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23621.036760, 25422.910200, 3570.312103, 3570.312103, 0.000000, X, Y) && !ellipse(24996.760406, 24657.537933, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26053.431200, 26035.490600, 6333.792182, 5247.120151, 127.553000, X, Y) && !ellipse(22885.605896, 24744.283051, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23524.313019, 24201.788879, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24226.786400, 28081.695200, 3639.456105, 3639.456105, 0.000000, X, Y) && !ellipse(20304.906799, 26615.757446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.890305, 27911.621490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19855.231125, 28710.344574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16363.924000, 19630.032000, 3630.528104, 2851.264082, 131.496600, X, Y) && !ellipse(18987.170000, 29987.374000, 1266.176036, 1266.176036, 0.000000, X, Y) && !ellipse(20721.818085, 29650.357697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19234.012000, 28870.396200, 1473.480042, 1473.480042, 0.000000, X, Y) && !ellipse(20246.374023, 29117.209229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18154.990189, 22910.669373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19374.828796, 22743.668030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19068.710000, 22432.842000, 1571.896045, 670.066419, 132.594700, X, Y) && !ellipse(19553.895920, 22084.598160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17465.528198, 21683.423233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18917.261047, 21535.875290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18337.154404, 21612.961411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21604.182556, 21969.245102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16788.724060, 21443.743118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.302933, 21452.510025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21170.681320, 21623.748795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16324.246000, 21038.138000, 1706.128049, 942.920027, 133.290000, X, Y) && !ellipse(17834.088000, 21197.114000, 1609.544046, 898.616026, 137.160000, X, Y)
[Sun May 12 19:42:39 2013] Writing fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src94.gif
[Mon May 13 00:01:58 2013] Mean detx,y = (3963.41, -3137.74) 
[Mon May 13 00:02:01 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 00:02:54 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 00:02:54 2013] Setting source spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Mon May 13 00:02:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src94_bgd.pi.gz