[Tue May  7 00:58:02 2013] Detection parameters:
  Position = (333.8, 323.3) = 23 22 51.77 58 50 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.0 +/- 24.2
  Background counts = 113.9
  Rate = 0.007 +/- 0.001

[Tue May  7 00:58:08 2013] Off-axis axis estimate = 3.14'
[Tue May  7 00:58:55 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Tue May  7 00:58:55 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Tue May  7 00:58:55 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Tue May  7 00:58:55 2013] Giving source the simple spatial ID 89 for pass 0, mean size = 8.00"
[Tue May  7 00:58:58 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src89.ximg exists
[Tue May  7 00:58:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src89.csv
[Tue May  7 00:58:58 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src89_1.ximg exists
[Tue May  7 00:58:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src89.csv
[Tue May  7 00:58:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 00:59:03 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Tue May  7 00:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src89.csv
[Tue May  7 00:59:03 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Tue May  7 00:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src89.csv
[Tue May  7 00:59:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:32:00 2013] Warning, spatial fit 89 centroid is now closest to src. 34
[Tue May  7 05:32:00 2013] Vigneting correction estimate = 1.000000
[Tue May  7 05:32:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 05:32:00 2013] Assessing source extent using major
[Tue May  7 05:32:00 2013] Source does appear to be extended
[Tue May  7 05:32:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 05:32:00 2013] Source is confused with source 32
[Tue May  7 05:32:32 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:32:32 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Tue May  7 05:32:32 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Tue May  7 05:32:32 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 8.00"
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src71.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src71.csv
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src71_1.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src71.csv
[Wed May  8 21:22:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src71.csv
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src71.csv
[Wed May  8 21:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:42:05 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 10.133094 pixels away
[Sun May 12 19:42:05 2013] Warning, spatial fit 71 centroid is now closest to src. 92
[Sun May 12 19:42:05 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:42:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:42:05 2013] Assessing source extent using major
[Sun May 12 19:42:05 2013] Source does appear to be extended
[Sun May 12 19:42:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 19:42:39 2013] XMMSAS src. selection expression = ellipse(28994.761932, 28077.191772, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 19:42:39 2013] Writing source region out to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src91_src.reg
[Sun May 12 19:42:39 2013] Extracting stamp from image fullrun_pn_xmm0097610501_pi300-10000_cl_sm2.00.img.gz, (296, 286) - (371, 361)
[Sun May 12 19:42:39 2013] XMMSAS bgd. selection expression = annulus(28994.761932, 28077.191772, 1087.500000, 2175.000000, X, Y) && !ellipse(23284.559800, 28087.121600, 3772.896109, 3772.896109, 0.000000, X, Y) && !ellipse(24332.808800, 28081.472660, 7278.912209, 5895.624170, 12.266000, X, Y) && !ellipse(24657.864502, 27013.722443, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23621.036760, 25422.910200, 3570.312103, 3570.312103, 0.000000, X, Y) && !ellipse(24996.760406, 24657.537933, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26053.431200, 26035.490600, 6333.792182, 5247.120151, 127.553000, X, Y) && !ellipse(24226.786400, 28081.695200, 3639.456105, 3639.456105, 0.000000, X, Y) && !ellipse(26411.872000, 30310.150000, 981.160028, 981.160028, 0.000000, X, Y) && !ellipse(27355.315857, 29268.429077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28412.082000, 28418.706000, 1312.536038, 1312.536038, 0.000000, X, Y) && !ellipse(27727.972000, 27633.824000, 1238.008036, 1238.008036, 0.000000, X, Y) && !ellipse(27779.501600, 31472.290000, 1371.680039, 1371.680039, 0.000000, X, Y) && !ellipse(31629.494000, 31880.428000, 3088.352089, 1600.160046, 322.062200, X, Y) && !ellipse(30971.224400, 31151.886000, 1544.176044, 1544.176044, 0.000000, X, Y) && !ellipse(28335.911102, 31017.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27209.738000, 31041.844000, 2743.360079, 1689.496049, 138.219000, X, Y) && !ellipse(27986.234200, 30181.158000, 1154.528033, 1154.528033, 0.000000, X, Y) && !ellipse(30415.744000, 30592.538000, 1426.200041, 1426.200041, 0.000000, X, Y) && !ellipse(29723.604000, 29679.778000, 1354.600039, 873.752025, 126.968000, X, Y) && !ellipse(27905.467133, 29706.734589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28551.020000, 29046.114000, 1349.456039, 1349.456039, 0.000000, X, Y) && !ellipse(29459.104000, 29546.326000, 2779.472080, 1372.296039, 314.295500, X, Y) && !ellipse(28980.270000, 28883.042000, 1354.600039, 1354.600039, 0.000000, X, Y) && !ellipse(29209.171478, 27243.520538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30087.277283, 26675.554016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29940.456818, 25450.433228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.948120, 25200.594971, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 19:42:39 2013] Writing fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src91.gif
[Sun May 12 23:58:54 2013] Mean detx,y = (-1716.31, 5133.27) 
[Sun May 12 23:58:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 23:59:21 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 23:59:22 2013] Setting source spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sun May 12 23:59:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src91_bgd.pi.gz