[Tue May  7 00:58:01 2013] Detection parameters:
  Position = (222.3, 343.9) = 23 23 54.34 58 51 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.6 +/- 21.5
  Background counts = 104.1
  Rate = 0.005 +/- 0.0009

[Tue May  7 00:58:08 2013] Off-axis axis estimate = 6.43'
[Tue May  7 00:58:55 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Tue May  7 00:58:55 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Tue May  7 00:58:55 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.016
[Tue May  7 00:58:55 2013] Giving source the simple spatial ID 78 for pass 0, mean size = 9.65"
[Tue May  7 00:58:58 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src78.ximg exists
[Tue May  7 00:58:58 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src78_1.ximg exists
[Tue May  7 00:58:58 2013] Fit fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src78 appears to have run properly
[Tue May  7 00:59:02 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Tue May  7 00:59:02 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Tue May  7 00:59:02 2013] Fit fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Tue May  7 05:31:59 2013] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 80 at 10.970375 pixels away
[Tue May  7 05:31:59 2013] Spatial fit model total counts = 1911.340000, observed total counts = 1599.000000
[Tue May  7 05:31:59 2013] Poor agreement between spatial fit and data for source 80
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 05:31:59 2013] Spatial fit model total counts = 2623.210000, observed total counts = 2487.000000
[Tue May  7 05:31:59 2013] Offset between fit and detection position for source 80 = 3.946538 pixels
[Tue May  7 05:31:59 2013] Warning, changing simple spatial fit ID from 78 to 84
[Tue May  7 05:31:59 2013] 2628.754000 total counts/ 2413.350000 bgd. counts: snr = 4.384738
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 3.946538 pixels
  Position = (218.7, 345.6) = 23 23 56.36 58 52 0.8
  Extent = 17.8 (15.4-18.9)", rotation angle = 0
  Source counts = 215.4 +/- 51.3
  Background counts = 2413.3
  Rate = 0.01 +/- 0.002
[Tue May  7 05:32:00 2013] Vigneting correction estimate = 1.000000
[Tue May  7 05:32:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 05:32:00 2013] Assessing source extent using major axis lower bound
[Tue May  7 05:32:00 2013] Source does appear to be extended
[Tue May  7 05:32:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 05:32:00 2013] Source is confused with source 86
[Tue May  7 05:32:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 05:32:32 2013] Initial guess for spatial extent in simple fitting = 17.76"
[Tue May  7 05:32:32 2013] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.964
[Tue May  7 05:32:32 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 17.76"
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src62.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src62.csv
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src62_1.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src62.csv
[Wed May  8 21:22:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src62.csv
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src62.csv
[Wed May  8 21:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:42:05 2013] Warning, spatial fit 62 centroid is now closest to src. 84
[Sun May 12 19:42:05 2013] Spatial fit model total counts = 2626.020000, observed total counts = 2487.000000
[Sun May 12 19:42:05 2013] Offset between fit and detection position for source 80 = 0.350035 pixels
[Sun May 12 19:42:05 2013] Warning, changing simple spatial fit ID from 62 to 67
[Sun May 12 19:42:05 2013] 2633.164000 total counts/ 2440.960000 bgd. counts: snr = 3.890291
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.350035 pixels
  Position = (218.8, 345.2) = 23 23 56.28 58 51 59.4
  Extent = 15.8 (9.6-18.9)", rotation angle = 0
  Source counts = 192.2 +/- 51.3
  Background counts = 2441.0
  Rate = 0.009 +/- 0.002
[Sun May 12 19:42:05 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:42:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:42:05 2013] Assessing source extent using major axis lower bound
[Sun May 12 19:42:05 2013] Source does appear to be extended
[Sun May 12 19:42:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 19:42:38 2013] XMMSAS src. selection expression = ellipse(18987.170000, 29987.374000, 949.632027, 949.632027, 0.000000, X, Y)
[Sun May 12 19:42:38 2013] Writing source region out to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src80_src.reg
[Sun May 12 19:42:38 2013] Extracting stamp from image fullrun_pn_xmm0097610501_pi300-10000_cl_sm2.00.img.gz, (164, 291) - (273, 400)
[Sun May 12 19:42:38 2013] XMMSAS bgd. selection expression = annulus(18987.170000, 29987.374000, 1582.720046, 3165.440091, X, Y) && !ellipse(21882.610800, 25332.475600, 3918.480113, 3918.480113, 0.000000, X, Y) && !ellipse(23284.559800, 28087.121600, 3772.896109, 3772.896109, 0.000000, X, Y) && !ellipse(24332.808800, 28081.472660, 7278.912209, 5895.624170, 12.266000, X, Y) && !ellipse(22259.677429, 27615.229950, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20569.021149, 26994.709778, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21803.648270, 26763.764709, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24657.864502, 27013.722443, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23612.470612, 26577.357758, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21367.529175, 26049.206055, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22245.162384, 26252.764496, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23621.036760, 25422.910200, 3570.312103, 3570.312103, 0.000000, X, Y) && !ellipse(26053.431200, 26035.490600, 6333.792182, 5247.120151, 127.553000, X, Y) && !ellipse(22885.605896, 24744.283051, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24226.786400, 28081.695200, 3639.456105, 3639.456105, 0.000000, X, Y) && !ellipse(20304.906799, 26615.757446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.890305, 27911.621490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19855.231125, 28710.344574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22610.300598, 31570.758972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21848.848816, 30690.736237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20721.818085, 29650.357697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19234.012000, 28870.396200, 1473.480042, 1473.480042, 0.000000, X, Y) && !ellipse(20246.374023, 29117.209229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18949.322000, 25892.104000, 1485.597953, 1485.597953, 0.000000, X, Y)
[Sun May 12 19:42:38 2013] Writing fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src80.gif
[Sun May 12 23:39:17 2013] Mean detx,y = (6622.27, -267.47) 
[Sun May 12 23:39:20 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 23:39:52 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 23:39:53 2013] Setting source spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sun May 12 23:39:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src80_bgd.pi.gz