[Tue May  7 00:58:01 2013] Detection parameters:
  Position = (251.7, 353.3) = 23 23 37.83 58 52 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.2 +/- 22.1
  Background counts = 106.2
  Rate = 0.007 +/- 0.0009

[Tue May  7 00:58:08 2013] Off-axis axis estimate = 5.23'
[Tue May  7 00:58:55 2013] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Tue May  7 00:58:55 2013] Initial guess for spatial extent in simple fitting = 9.04"
[Tue May  7 00:58:55 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.827
[Tue May  7 00:58:55 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 9.04"
[Tue May  7 00:58:57 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src70.ximg exists
[Tue May  7 00:58:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src70.csv
[Tue May  7 00:58:57 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src70_1.ximg exists
[Tue May  7 00:58:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src70.csv
[Tue May  7 00:58:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 00:59:02 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Tue May  7 00:59:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src70.csv
[Tue May  7 00:59:02 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Tue May  7 00:59:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src70.csv
[Tue May  7 00:59:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:31:59 2013] Warning, spatial fit 70 centroid is now closest to src. 79
[Tue May  7 05:31:59 2013] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 10.415186 pixels away
[Tue May  7 05:32:00 2013] Vigneting correction estimate = 1.000000
[Tue May  7 05:32:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 05:32:00 2013] Assessing source extent using major
[Tue May  7 05:32:00 2013] Source does appear to be extended
[Tue May  7 05:32:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 05:32:32 2013] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:32:32 2013] Initial guess for spatial extent in simple fitting = 9.04"
[Tue May  7 05:32:32 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.827
[Tue May  7 05:32:32 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 9.04"
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src57.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src57.csv
[Wed May  8 21:22:05 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src57_1.ximg exists
[Wed May  8 21:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src57.csv
[Wed May  8 21:22:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed May  8 21:22:07 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Wed May  8 21:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed May  8 21:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:42:05 2013] Source 72 is offset by 5.787734 and 1.778508 pixels which is larger than
2 X fitted extent = 2.713467 x 2.713467, not incorporating fit results
[Sun May 12 19:42:05 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:42:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:42:05 2013] Assessing source extent using major
[Sun May 12 19:42:05 2013] Source does appear to be extended
[Sun May 12 19:42:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 19:42:37 2013] XMMSAS src. selection expression = ellipse(21848.848816, 30690.736237, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 19:42:37 2013] Writing source region out to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src72_src.reg
[Sun May 12 19:42:37 2013] Extracting stamp from image fullrun_pn_xmm0097610501_pi300-10000_cl_sm2.00.img.gz, (214, 316) - (289, 391)
[Sun May 12 19:42:37 2013] XMMSAS bgd. selection expression = annulus(21848.848816, 30690.736237, 1087.500000, 2175.000000, X, Y) && !ellipse(21882.610800, 25332.475600, 3918.480113, 3918.480113, 0.000000, X, Y) && !ellipse(23284.559800, 28087.121600, 3772.896109, 3772.896109, 0.000000, X, Y) && !ellipse(24332.808800, 28081.472660, 7278.912209, 5895.624170, 12.266000, X, Y) && !ellipse(22259.677429, 27615.229950, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20569.021149, 26994.709778, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21803.648270, 26763.764709, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24657.864502, 27013.722443, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23612.470612, 26577.357758, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21367.529175, 26049.206055, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22245.162384, 26252.764496, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23621.036760, 25422.910200, 3570.312103, 3570.312103, 0.000000, X, Y) && !ellipse(26053.431200, 26035.490600, 6333.792182, 5247.120151, 127.553000, X, Y) && !ellipse(24226.786400, 28081.695200, 3639.456105, 3639.456105, 0.000000, X, Y) && !ellipse(21085.890305, 27911.621490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25205.594014, 30070.658829, 1333.304038, 1333.304038, 229.216822, X, Y) && !ellipse(19855.231125, 28710.344574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22610.300598, 31570.758972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.191681, 31444.395508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.015564, 31275.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18987.170000, 29987.374000, 1266.176036, 1266.176036, 0.000000, X, Y) && !ellipse(20721.818085, 29650.357697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19234.012000, 28870.396200, 1473.480042, 1473.480042, 0.000000, X, Y) && !ellipse(20246.374023, 29117.209229, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 19:42:37 2013] Writing fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src72.gif
[Sun May 12 23:28:04 2013] Mean detx,y = (5178.89, 2094.77) 
[Sun May 12 23:28:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 23:28:27 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 23:28:27 2013] Setting source spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Sun May 12 23:28:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src72_bgd.pi.gz