[Tue May  7 00:57:57 2013] Detection parameters:
  Position = (140.0, 174.0) = 23 24 39.97 58 39 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 728.2 +/- 38.2
  Background counts = 86.5
  Rate = 0.03 +/- 0.002

[Tue May  7 00:58:08 2013] Off-axis axis estimate = 14.61'
[Tue May  7 00:58:55 2013] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Tue May  7 00:58:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  7 00:58:55 2013] Initial guess for spatial extent in simple fitting = 13.73"
[Tue May  7 00:58:55 2013] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.196
[Tue May  7 00:58:55 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 13.73"
[Tue May  7 00:58:56 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src22.ximg exists
[Tue May  7 00:58:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src22.csv
[Tue May  7 00:58:56 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue May  7 00:58:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src22.csv
[Tue May  7 00:58:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 00:58:59 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue May  7 00:58:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue May  7 00:58:59 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue May  7 00:58:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue May  7 00:58:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:31:59 2013] Spatial fit model total counts = 4794.950000, observed total counts = 4231.000000
[Tue May  7 05:31:59 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 05:31:59 2013] Spatial fit model total counts = 4478.650000, observed total counts = 2806.000000
[Tue May  7 05:31:59 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 05:31:59 2013] Spatial fit model total counts = 4707.310000, observed total counts = 4535.000000
[Tue May  7 05:31:59 2013] Offset between fit and detection position for source 22 = 3.540936 pixels
[Tue May  7 05:31:59 2013] Warning, changing simple spatial fit ID from 22 to 44
[Tue May  7 05:31:59 2013] 4826.100000 total counts/ 3616.870000 bgd. counts: snr = 20.106777
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.540936 pixels
  Position = (142.0, 176.9) = 23 24 38.87 58 39 45.8
  Extent = 26.5 (26.5-53.0)", rotation angle = 0
  Source counts = 1209.2 +/- 69.5
  Background counts = 3616.9
  Rate = 0.06 +/- 0.003
[Tue May  7 05:32:00 2013] Vigneting correction estimate = 1.000000
[Tue May  7 05:32:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 05:32:00 2013] Assessing source extent using major axis lower bound
[Tue May  7 05:32:00 2013] Source does appear to be extended
[Tue May  7 05:32:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 05:32:00 2013] Source is confused with source 27
[Tue May  7 05:32:00 2013] Source is confused with source 30
[Tue May  7 05:32:00 2013] Source is confused with source 45
[Tue May  7 05:32:00 2013] Source is confused with source 46
[Tue May  7 05:32:00 2013] Source is confused with source 47
[Tue May  7 05:32:00 2013] Source is confused with source 48
[Tue May  7 05:32:00 2013] Source is confused with source 160
[Tue May  7 05:32:00 2013] Source is confused with source 161
[Tue May  7 05:32:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 05:32:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  7 05:32:32 2013] Initial guess for spatial extent in simple fitting = 26.50"
[Tue May  7 05:32:32 2013] source mask rpix=6.1, npix_max = 173, mask sum = 195, frac = 1.122
[Tue May  7 05:32:32 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 26.50"
[Wed May  8 21:22:04 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src22.ximg exists
[Wed May  8 21:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src22.csv
[Wed May  8 21:22:04 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed May  8 21:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src22.csv
[Wed May  8 21:22:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 21:22:06 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed May  8 21:22:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May  8 21:22:06 2013] fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed May  8 21:22:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May  8 21:22:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:42:05 2013] Warning, spatial fit 22 centroid is now closest to src. 45
[Sun May 12 19:42:05 2013] Spatial fit model total counts = 7649.350000, observed total counts = 3426.000000
[Sun May 12 19:42:05 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 19:42:05 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:42:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:42:05 2013] Assessing source extent using major axis lower bound
[Sun May 12 19:42:05 2013] Source does appear to be extended
[Sun May 12 19:42:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 19:42:35 2013] Counts = 1209.230000, rescaling region sizes by 2.000000
[Sun May 12 19:42:35 2013] XMMSAS src. selection expression = ellipse(12301.388000, 15343.330000, 3180.096092, 3180.096092, 0.000000, X, Y)
[Sun May 12 19:42:35 2013] Writing source region out to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src22_src.reg
[Sun May 12 19:42:35 2013] Extracting stamp from image fullrun_pn_xmm0097610501_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (325, 360)
[Sun May 12 19:42:35 2013] XMMSAS bgd. selection expression = annulus(12301.388000, 15343.330000, 10600.320305, 21200.640610, X, Y) && !ellipse(21882.610800, 25332.475600, 3918.480113, 3918.480113, 0.000000, X, Y) && !ellipse(23284.559800, 28087.121600, 3772.896109, 3772.896109, 0.000000, X, Y) && !ellipse(24332.808800, 28081.472660, 7278.912209, 5895.624170, 12.266000, X, Y) && !ellipse(22259.677429, 27615.229950, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20569.021149, 26994.709778, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21803.648270, 26763.764709, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24657.864502, 27013.722443, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23612.470612, 26577.357758, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21367.529175, 26049.206055, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22245.162384, 26252.764496, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23621.036760, 25422.910200, 3570.312103, 3570.312103, 0.000000, X, Y) && !ellipse(24996.760406, 24657.537933, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26053.431200, 26035.490600, 6333.792182, 5247.120151, 127.553000, X, Y) && !ellipse(22885.605896, 24744.283051, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23524.313019, 24201.788879, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24226.786400, 28081.695200, 3639.456105, 3639.456105, 0.000000, X, Y) && !ellipse(20304.906799, 26615.757446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26802.517517, 24625.096130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26300.809906, 24107.530029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24507.788971, 23279.768890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25888.701569, 23761.006226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.890305, 27911.621490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25994.440765, 31350.670319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12123.204361, 14450.823410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25205.594014, 30070.658829, 1333.304038, 1333.304038, 229.216822, X, Y) && !ellipse(26411.872000, 30310.150000, 981.160028, 981.160028, 0.000000, X, Y) && !ellipse(11619.220062, 14773.609924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.315857, 29268.429077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28412.082000, 28418.706000, 1312.536038, 1312.536038, 0.000000, X, Y) && !ellipse(19855.231125, 28710.344574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27727.972000, 27633.824000, 1238.008036, 1238.008036, 0.000000, X, Y) && !ellipse(17049.954000, 20400.408800, 753.048822, 321.100809, 100.410800, X, Y) && !ellipse(24983.973785, 22648.238312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17324.284622, 19198.998154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16363.924000, 19630.032000, 3630.528104, 2851.264082, 131.496600, X, Y) && !ellipse(15523.394000, 18830.876000, 1815.264052, 1815.264052, 0.000000, X, Y) && !ellipse(14480.764000, 17691.392000, 2738.840079, 735.336021, 131.907000, X, Y) && !ellipse(13516.543823, 16910.544769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14131.204000, 17358.758000, 2050.168059, 688.668820, 312.678000, X, Y) && !ellipse(13711.859726, 16312.316223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13135.854000, 16224.466000, 2120.064061, 617.457618, 131.816000, X, Y) && !ellipse(11496.835159, 15605.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10977.634888, 15377.878662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12365.676239, 13909.387268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29679.175385, 33881.903564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.499200, 32648.644000, 1047.144030, 1047.144030, 0.000000, X, Y) && !ellipse(28044.430000, 31996.932000, 1506.056043, 1506.056043, 0.000000, X, Y) && !ellipse(27779.501600, 31472.290000, 1371.680039, 1371.680039, 0.000000, X, Y) && !ellipse(22610.300598, 31570.758972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.191681, 31444.395508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.015564, 31275.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.494000, 31880.428000, 3088.352089, 1600.160046, 322.062200, X, Y) && !ellipse(27567.091680, 31379.270000, 1091.760031, 1091.760031, 0.000000, X, Y) && !ellipse(30971.224400, 31151.886000, 1544.176044, 1544.176044, 0.000000, X, Y) && !ellipse(28335.911102, 31017.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21848.848816, 30690.736237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27209.738000, 31041.844000, 2743.360079, 1689.496049, 138.219000, X, Y) && !ellipse(27986.234200, 30181.158000, 1154.528033, 1154.528033, 0.000000, X, Y) && !ellipse(30415.744000, 30592.538000, 1426.200041, 1426.200041, 0.000000, X, Y) && !ellipse(18987.170000, 29987.374000, 1266.176036, 1266.176036, 0.000000, X, Y) && !ellipse(29723.604000, 29679.778000, 1354.600039, 873.752025, 126.968000, X, Y) && !ellipse(27905.467133, 29706.734589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28551.020000, 29046.114000, 1349.456039, 1349.456039, 0.000000, X, Y) && !ellipse(20721.818085, 29650.357697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19234.012000, 28870.396200, 1473.480042, 1473.480042, 0.000000, X, Y) && !ellipse(29459.104000, 29546.326000, 2779.472080, 1372.296039, 314.295500, X, Y) && !ellipse(20246.374023, 29117.209229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28980.270000, 28883.042000, 1354.600039, 1354.600039, 0.000000, X, Y) && !ellipse(28994.761932, 28077.191772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29209.171478, 27243.520538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30087.277283, 26675.554016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18949.322000, 25892.104000, 1485.597953, 1485.597953, 0.000000, X, Y) && !ellipse(29940.456818, 25450.433228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.948120, 25200.594971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28884.793274, 24712.234192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.831024, 24055.228607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29669.904022, 23623.539429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.524200, 23318.256195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18154.990189, 22910.669373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.424988, 22569.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19374.828796, 22743.668030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.386993, 21861.190720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19068.710000, 22432.842000, 1571.896045, 670.066419, 132.594700, X, Y) && !ellipse(26735.963898, 22276.743958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19553.895920, 22084.598160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17465.528198, 21683.423233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28531.716858, 21608.538132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18917.261047, 21535.875290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18337.154404, 21612.961411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21604.182556, 21969.245102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16788.724060, 21443.743118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.302933, 21452.510025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21170.681320, 21623.748795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27361.873779, 21553.049347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16324.246000, 21038.138000, 1706.128049, 942.920027, 133.290000, X, Y) && !ellipse(22572.657593, 21282.650543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17834.088000, 21197.114000, 1609.544046, 898.616026, 137.160000, X, Y) && !ellipse(21430.240967, 21106.949997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23606.929565, 20843.467545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15984.842255, 20567.467957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26908.864716, 20757.711426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22763.060364, 20459.056473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22759.250397, 19961.557083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17588.987061, 20064.710281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15980.198608, 19955.299179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23875.868103, 20228.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16506.242000, 19767.858000, 1815.264052, 1013.504029, 131.203000, X, Y) && !ellipse(27001.942078, 20043.977158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23193.496368, 20053.662704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15255.998215, 19611.974686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25071.560547, 20315.083527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.875275, 19541.523483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24020.009644, 19711.855560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16602.473755, 19270.419769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15164.806000, 18349.760000, 1947.088056, 1947.088056, 0.000000, X, Y) && !ellipse(16207.727982, 18679.390335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13805.550400, 18560.957443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13330.042618, 17620.713333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12729.745804, 17004.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12350.646118, 16994.020218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14049.666000, 16934.194000, 2061.416059, 2061.416059, 0.000000, X, Y) && !ellipse(11860.045822, 16036.333893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13473.821747, 15652.009109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29388.008942, 34489.294617, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 19:42:35 2013] Writing fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src22.gif
[Sun May 12 22:28:13 2013] Mean detx,y = (1567.13, -14620.73) 
[Sun May 12 22:28:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 22:32:50 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 22:32:51 2013] Setting source spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun May 12 22:32:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0097610501_pi300-10000_pass1_cl_src22_bgd.pi.gz