[Tue May  7 00:58:12 2013] Detection parameters:
  Position = (256.3, 318.1) = 23 23 35.25 58 50 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91779.8 +/- 361.5
  Background counts = 38.2
  Rate = 6 +/- 0.02

[Tue May  7 00:58:14 2013] Off-axis axis estimate = 3.37'
[Tue May  7 05:31:23 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Tue May  7 05:31:23 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Tue May  7 05:31:23 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.893
[Tue May  7 05:31:23 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.12"
[Tue May  7 05:31:24 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_src4.ximg exists
[Tue May  7 05:31:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_src4.csv
[Tue May  7 05:31:24 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May  7 05:31:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_src4.csv
[Tue May  7 05:31:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:31:25 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May  7 05:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May  7 05:31:25 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May  7 05:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May  7 05:31:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:32:12 2013] Spatial fit model total counts = 265771.000000, observed total counts = 239812.000000
[Tue May  7 05:32:12 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 05:32:12 2013] Vigneting correction estimate = 1.000000
[Tue May  7 05:32:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 05:32:12 2013] Assessing source extent using major
[Tue May  7 05:32:12 2013] Source does appear to be extended
[Tue May  7 05:32:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 13:32:02 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Thu May  9 13:32:02 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Thu May  9 13:32:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.893
[Thu May  9 13:32:02 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.12"
[Sun May 12 19:41:38 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 12 19:41:38 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 12 19:41:38 2013] Fit fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_src4 appears to have run properly
[Sun May 12 19:41:39 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 12 19:41:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 12 19:41:39 2013] fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 12 19:41:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 12 19:41:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:42:12 2013] Spatial fit model total counts = 257962.000000, observed total counts = 239812.000000
[Sun May 12 19:42:12 2013] Offset between fit and detection position for source 14 = 3.330762 pixels
[Sun May 12 19:42:12 2013] 241087.000000 total counts/ 25600.000000 bgd. counts: snr = 1346.793750
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 3.330762 pixels
  Position = (253.3, 316.5) = 23 23 36.88 58 49 54.6
  Extent = 16.2 (16.2-32.5)" x 15.0 (15.0-15.1)", rotation angle = 152 (151-153) degrees
  Source counts = 215487.0 +/- 491.0
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.03
[Sun May 12 19:42:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:42:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:42:12 2013] Assessing source extent using major axis lower bound
[Sun May 12 19:42:12 2013] Source does appear to be extended
[Sun May 12 19:42:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Sun May 12 19:42:12 2013] Source is confused with source 3
[Sun May 12 19:42:12 2013] Source is confused with source 8
[Fri May 17 15:03:57 2013] Counts = 215487.000000, rescaling region sizes by 3.000000
[Fri May 17 15:03:57 2013] XMMSAS src. selection expression = ellipse(21991.884000, 27484.064000, 2921.526084, 2707.272078, 152.340600, X, Y)
[Fri May 17 15:03:57 2013] Writing source region out to fullrun_mos2_xmm0097610501_pi300-10000_pass1_cl_src14_src.reg
[Fri May 17 15:03:57 2013] Extracting stamp from image fullrun_mos2_xmm0097610501_pi300-10000_cl_sm2.00.img.gz, (85, 149) - (421, 484)
[Fri May 17 15:03:57 2013] XMMSAS bgd. selection expression = annulus(21991.884000, 27484.064000, 14607.630420, 29215.260841, X, Y) && !ellipse(21932.162200, 25328.397200, 3915.792113, 3915.792113, 0.000000, X, Y) && !ellipse(24374.732400, 27974.426000, 7262.832209, 5955.000171, 356.978070, X, Y) && !ellipse(23441.549327, 28046.797400, 7526.928217, 7517.952216, 355.185150, X, Y) && !ellipse(21862.642560, 25622.214000, 7824.000225, 7824.000225, 0.000000, X, Y) && !ellipse(25817.846720, 25873.342000, 7522.392216, 5520.840159, 307.249300, X, Y) && !ellipse(25410.001200, 27431.984600, 3977.736114, 3977.736114, 324.005000, X, Y) && !ellipse(26138.365600, 25985.248990, 3977.736114, 3977.736114, 0.801000, X, Y) && !ellipse(21397.058000, 26323.998000, 3956.688114, 3956.688114, 0.000000, X, Y) && !ellipse(22892.676239, 24887.105042, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24780.824219, 26806.311554, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23687.814000, 25321.965200, 3606.240104, 3606.240104, 0.000000, X, Y) && !ellipse(25448.016000, 25162.040000, 6932.496199, 5350.776154, 129.012000, X, Y) && !ellipse(24088.434000, 24423.844000, 3616.296104, 3616.296104, 0.000000, X, Y) && !ellipse(24721.108800, 23257.601800, 637.608018, 437.800813, 2.959990, X, Y) && !ellipse(29057.516205, 30836.927460, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 15:03:57 2013] Writing fullrun_mos2_xmm0097610501_pi300-10000_pass1_cl_src14.gif
[Fri May 17 15:28:10 2013] Mean detx,y = (-1699.88, -110.03) 
[Fri May 17 15:28:21 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 15:39:00 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 15:39:01 2013] Setting source spectrum file to fullrun_mos2_xmm0097610501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri May 17 15:39:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0097610501_pi300-10000_pass1_cl_src14_bgd.pi.gz