[Tue May  7 00:58:09 2013] Detection parameters:
  Position = (274.0, 279.0) = 23 23 25.28 58 47 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27325.5 +/- 207.4
  Background counts = 45.3
  Rate = 2 +/- 0.01

[Tue May  7 00:58:11 2013] Off-axis axis estimate = 2.26'
[Tue May  7 00:59:03 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Tue May  7 00:59:03 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Tue May  7 00:59:03 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Tue May  7 00:59:03 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.56"
[Tue May  7 05:31:21 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_src17.ximg exists
[Tue May  7 05:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_src17.csv
[Tue May  7 05:31:21 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May  7 05:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_src17.csv
[Tue May  7 05:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:31:22 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May  7 05:31:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue May  7 05:31:23 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May  7 05:31:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue May  7 05:31:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097610501_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 05:32:07 2013] Spatial fit model total counts = 96031.800000, observed total counts = 114704.000000
[Tue May  7 05:32:07 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 05:32:07 2013] Vigneting correction estimate = 1.000000
[Tue May  7 05:32:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 05:32:07 2013] Assessing source extent using major
[Tue May  7 05:32:07 2013] Source does appear to be extended
[Tue May  7 05:32:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 21:22:08 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Wed May  8 21:22:08 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Wed May  8 21:22:08 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Wed May  8 21:22:08 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.56"
[Thu May  9 13:32:02 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_src17.ximg exists
[Thu May  9 13:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_src17.csv
[Thu May  9 13:32:02 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu May  9 13:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_src17.csv
[Thu May  9 13:32:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:32:02 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu May  9 13:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May  9 13:32:02 2013] fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu May  9 13:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May  9 13:32:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0097610501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:42:10 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.866738 pixels away
[Sun May 12 19:42:10 2013] Spatial fit model total counts = 101795.000000, observed total counts = 114704.000000
[Sun May 12 19:42:10 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 19:42:10 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:42:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:42:10 2013] Assessing source extent using major
[Sun May 12 19:42:10 2013] Source does appear to be extended
[Sun May 12 19:42:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 01:02:40 2013] Counts = 27325.488281, rescaling region sizes by 3.000000
[Mon May 13 01:02:40 2013] XMMSAS src. selection expression = ellipse(23789.709747, 24228.684326, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon May 13 01:02:40 2013] Writing source region out to fullrun_mos1_xmm0097610501_pi300-10000_pass1_cl_src15_src.reg
[Mon May 13 01:02:40 2013] Extracting stamp from image fullrun_mos1_xmm0097610501_pi300-10000_cl_sm2.00.img.gz, (162, 167) - (387, 392)
[Mon May 13 01:02:40 2013] XMMSAS bgd. selection expression = annulus(23789.709747, 24228.684326, 9787.500000, 19575.000000, X, Y) && !ellipse(24239.567000, 28172.010200, 7787.280224, 7787.280224, 0.000000, X, Y) && !ellipse(21710.680000, 25806.570000, 8140.368234, 6497.688187, 52.270300, X, Y) && !ellipse(21740.793106, 25089.049225, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22305.196000, 27706.162800, 7126.608205, 7126.608205, 0.000000, X, Y) && !ellipse(23257.507800, 28007.741400, 7549.392217, 7549.392217, 0.000000, X, Y) && !ellipse(21931.076000, 25271.484000, 7556.784217, 6024.096173, 46.787300, X, Y) && !ellipse(21404.804000, 26277.556000, 3947.856114, 3947.856114, 0.000000, X, Y) && !ellipse(25181.782000, 27511.636000, 3494.928101, 3423.744099, 68.572400, X, Y) && !ellipse(25809.517975, 25531.602783, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25074.232000, 27212.727600, 6838.416197, 6838.416197, -0.000000, X, Y) && !ellipse(25971.535800, 25960.225800, 6752.952194, 5928.816171, 122.069000, X, Y) && !ellipse(23544.173000, 25310.084800, 3606.648104, 3606.648104, 0.000000, X, Y) && !ellipse(21278.316000, 26335.050000, 3947.856114, 3947.856114, 0.000000, X, Y) && !ellipse(21573.472000, 26040.266000, 7895.712227, 5921.976170, 35.721400, X, Y) && !ellipse(24064.620000, 27668.622000, 7130.352205, 7130.352205, 0.000000, X, Y) && !ellipse(24749.020000, 24503.060000, 3397.368098, 3397.368098, 0.000000, X, Y) && !ellipse(24681.623800, 23273.302000, 758.132022, 452.708813, 4.908560, X, Y) && !ellipse(19594.720600, 31721.278000, 1618.632047, 1618.632047, 0.000000, X, Y) && !ellipse(21930.650000, 33965.914000, 1604.768046, 1604.768046, 0.000000, X, Y)
[Mon May 13 01:02:40 2013] Writing fullrun_mos1_xmm0097610501_pi300-10000_pass1_cl_src15.gif
[Mon May 13 03:14:13 2013] Mean detx,y = (1011.01, -356.48) 
[Mon May 13 03:14:19 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 03:24:17 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 03:24:17 2013] Setting source spectrum file to fullrun_mos1_xmm0097610501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 13 03:24:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0097610501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri May 17 14:48:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 14:48:46 2013] rmf not generated due to insufficient counts