[Thu May 17 13:20:48 2012] Detection parameters:
  Position = (143.8, 337.8) = 13 38 7.57 24 24 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 466.4 +/- 26.4
  Background counts = 11.0
  Rate = 0.01 +/- 0.0006

[Thu May 17 13:20:49 2012] Off-axis axis estimate = 11.57'
[Thu May 17 13:21:43 2012] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:21:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 13:21:43 2012] Initial guess for spatial extent in simple fitting = 12.21"
[Thu May 17 13:21:43 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.823
[Thu May 17 13:21:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.21"
[Thu May 17 14:46:47 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 17 14:46:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src3.csv
[Thu May 17 14:46:47 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 17 14:46:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src3.csv
[Thu May 17 14:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:46:48 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 17 14:46:48 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 17 14:46:48 2012] Fit fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 17 14:46:59 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.151922 pixels away
[Thu May 17 14:46:59 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:46:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:46:59 2012] Assessing source extent using major
[Thu May 17 14:46:59 2012] Source does appear to be extended
[Thu May 17 14:46:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:47:04 2012] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Thu May 17 14:47:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 14:47:04 2012] Initial guess for spatial extent in simple fitting = 12.21"
[Thu May 17 14:47:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.823
[Thu May 17 14:47:04 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.21"
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 17 15:40:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src3.csv
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 17 15:40:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src3.csv
[Thu May 17 15:40:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 17 15:40:23 2012] Fit fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 17 15:40:32 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.139206 pixels away
[Thu May 17 15:40:32 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 84.436277 pixels away
[Thu May 17 15:40:32 2012] Vigneting correction estimate = 1.000000
[Thu May 17 15:40:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 15:40:32 2012] Assessing source extent using major
[Thu May 17 15:40:32 2012] Source does appear to be extended
[Thu May 17 15:40:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 15:40:37 2012] XMMSAS src. selection expression = ellipse(12465.991211, 29341.160950, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 15:40:37 2012] Writing source region out to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 17 15:40:37 2012] Extracting stamp from image fullrun_mos1_xmm0096010101_pi300-10000_cl_sm2.00.img.gz, (106, 300) - (181, 375)
[Thu May 17 15:40:37 2012] XMMSAS bgd. selection expression = annulus(12465.991211, 29341.160950, 1087.500000, 2175.000000, X, Y)
[Thu May 17 15:40:37 2012] Writing fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src3.gif
[Thu May 17 15:48:41 2012] Mean detx,y = (9891.03, -9411.48) 
[Thu May 17 15:48:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 15:48:58 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 15:48:59 2012] Setting source spectrum file to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 15:48:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 17 16:27:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 17 16:27:29 2012] rmf not generated due to insufficient counts
[Thu May 17 17:06:02 2012] Updating aperture counts using extracted products
[Thu May 17 17:06:02 2012] Error reading totcts from fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 17:06:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 17:06:04 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src3.arf
[Thu May 17 17:06:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 17:06:04 2012] Updating source flux to 2.6e-13
[Thu May 17 17:06:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting