[Thu May 17 13:20:48 2012] Detection parameters:
  Position = (320.6, 155.8) = 13 37 11.30 24 10 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.5 +/- 12.2
  Background counts = 10.1
  Rate = 0.002 +/- 0.0003

[Thu May 17 13:20:49 2012] Off-axis axis estimate = 10.47'
[Thu May 17 13:21:43 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:21:43 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Thu May 17 13:21:43 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Thu May 17 13:21:43 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.66"
[Thu May 17 14:46:47 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src18.ximg exists
[Thu May 17 14:46:47 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu May 17 14:46:47 2012] Fit fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src18 appears to have run properly
[Thu May 17 14:46:48 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu May 17 14:46:48 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu May 17 14:46:48 2012] Fit fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu May 17 14:46:59 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.746430 pixels away
[Thu May 17 14:46:59 2012] Spatial fit model total counts = 201.416000, observed total counts = 195.000000
[Thu May 17 14:46:59 2012] Offset between fit and detection position for source 18 = 0.303378 pixels
[Thu May 17 14:46:59 2012] Warning, changing simple spatial fit ID from 18 to 29
[Thu May 17 14:46:59 2012] 195.076000 total counts/ 155.502000 bgd. counts: snr = 3.173525
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.303378 pixels
  Position = (320.7, 155.5) = 13 37 11.27 24 10 58.4
  Extent = 4.4 (3.5-6.4)", rotation angle = 0
  Source counts = 39.6 +/- 14.0
  Background counts = 155.5
  Rate = 0.0009 +/- 0.0003
[Thu May 17 14:46:59 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:46:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:46:59 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:46:59 2012] Source does appear to be extended
[Thu May 17 14:46:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:47:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 14:47:04 2012] Initial guess for spatial extent in simple fitting = 4.42"
[Thu May 17 14:47:04 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.980
[Thu May 17 14:47:04 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 4.42"
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src15.ximg exists
[Thu May 17 15:40:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src15.csv
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May 17 15:40:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src15.csv
[Thu May 17 15:40:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May 17 15:40:24 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May 17 15:40:24 2012] Fit fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu May 17 15:40:32 2012] Spatial fit model total counts = 190.999000, observed total counts = 191.000000
[Thu May 17 15:40:32 2012] Offset between fit and detection position for source 18 = 0.430329 pixels
[Thu May 17 15:40:32 2012] 196.222200 total counts/ 137.535000 bgd. counts: snr = 5.004224
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.430329 pixels
  Position = (320.3, 155.7) = 13 37 11.38 24 10 59.4
  Extent = 6.5 (4.0-8.8)", rotation angle = 0
  Source counts = 58.7 +/- 14.0
  Background counts = 137.5
  Rate = 0.001 +/- 0.0003
[Thu May 17 15:40:32 2012] Vigneting correction estimate = 1.000000
[Thu May 17 15:40:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 15:40:32 2012] Assessing source extent using major axis lower bound
[Thu May 17 15:40:32 2012] Source does appear to be extended
[Thu May 17 15:40:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 15:40:37 2012] XMMSAS src. selection expression = ellipse(27819.314200, 13498.232800, 388.348211, 388.348211, 0.000000, X, Y)
[Thu May 17 15:40:37 2012] Writing source region out to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src18_src.reg
[Thu May 17 15:40:37 2012] Extracting stamp from image fullrun_mos1_xmm0096010101_pi300-10000_cl_sm2.00.img.gz, (298, 133) - (343, 178)
[Thu May 17 15:40:37 2012] XMMSAS bgd. selection expression = annulus(27819.314200, 13498.232800, 647.247019, 1294.494037, X, Y)
[Thu May 17 15:40:37 2012] Writing fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src18.gif
[Thu May 17 15:55:27 2012] Mean detx,y = (-12087.02, -7941.52) 
[Thu May 17 15:55:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 15:55:59 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 15:55:59 2012] Setting source spectrum file to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 17 15:55:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May 17 16:57:39 2012] Not generating rmf since there are only 58 counts
[Thu May 17 16:57:39 2012] rmf not generated due to insufficient counts
[Thu May 17 17:06:03 2012] Updating aperture counts using extracted products
[Thu May 17 17:06:03 2012] Error reading totcts from fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 17 17:06:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 17:06:04 2012] Using photon index=1.80, rate=0.00137, arf fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src18.arf
[Thu May 17 17:06:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 17:06:04 2012] Updating source flux to 4.1e-14
[Thu May 17 17:06:06 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting