[Thu May 17 13:20:48 2012] Detection parameters:
  Position = (297.4, 322.0) = 13 37 18.68 24 23 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38552.5 +/- 236.1
  Background counts = 17.7
  Rate = 0.9 +/- 0.005

[Thu May 17 13:20:49 2012] Off-axis axis estimate = 1.71'
[Thu May 17 13:21:43 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:21:43 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu May 17 13:21:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu May 17 13:21:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu May 17 14:46:47 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 14:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src1.csv
[Thu May 17 14:46:47 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 14:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src1.csv
[Thu May 17 14:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:46:48 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 14:46:48 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 14:46:48 2012] Fit fullrun_mos1_xmm0096010101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 17 14:46:59 2012] Spatial fit model total counts = 33834.000000, observed total counts = 33834.000000
[Thu May 17 14:46:59 2012] Offset between fit and detection position for source 1 = 0.186110 pixels
[Thu May 17 14:46:59 2012] 33859.600000 total counts/ 7077.500000 bgd. counts: snr = 318.349878
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.186110 pixels
  Position = (297.2, 322.1) = 13 37 18.73 24 23 3.1
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 26782.1 +/- 184.0
  Background counts = 7077.5
  Rate = 0.6 +/- 0.004
[Thu May 17 14:46:59 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:46:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:46:59 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:46:59 2012] Source does appear to be extended
[Thu May 17 14:46:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:47:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 14:47:04 2012] Initial guess for spatial extent in simple fitting = 5.82"
[Thu May 17 14:47:04 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.183
[Thu May 17 14:47:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.82"
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 15:40:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src1.csv
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 15:40:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src1.csv
[Thu May 17 15:40:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 15:40:23 2012] fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 15:40:23 2012] Fit fullrun_mos1_xmm0096010101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 17 15:40:32 2012] Spatial fit model total counts = 33834.000000, observed total counts = 33834.000000
[Thu May 17 15:40:32 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Thu May 17 15:40:32 2012] 33859.690000 total counts/ 7077.490000 bgd. counts: snr = 318.351292
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (297.2, 322.1) = 13 37 18.73 24 23 3.1
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 26782.2 +/- 184.0
  Background counts = 7077.5
  Rate = 0.6 +/- 0.004
[Thu May 17 15:40:32 2012] Vigneting correction estimate = 1.000000
[Thu May 17 15:40:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 15:40:32 2012] Assessing source extent using major axis lower bound
[Thu May 17 15:40:32 2012] Source does appear to be extended
[Thu May 17 15:40:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 15:40:37 2012] Counts = 26782.200000, rescaling region sizes by 3.000000
[Thu May 17 15:40:37 2012] XMMSAS src. selection expression = ellipse(25807.612140, 27971.016800, 1048.411479, 1048.411479, 0.000000, X, Y)
[Thu May 17 15:40:37 2012] Writing source region out to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 17 15:40:37 2012] Extracting stamp from image fullrun_mos1_xmm0096010101_pi300-10000_cl_sm2.00.img.gz, (237, 262) - (357, 382)
[Thu May 17 15:40:37 2012] XMMSAS bgd. selection expression = annulus(25807.612140, 27971.016800, 5242.057397, 10484.114795, X, Y) && !ellipse(22512.177000, 28029.603000, 463.408013, 463.408013, 0.000000, X, Y) && !ellipse(33852.881439, 24317.813660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34145.983398, 38129.889374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32589.525600, 33692.728000, 829.800024, 410.918412, 51.378783, X, Y) && !ellipse(19953.961092, 34054.663502, 691.116459, 347.634106, 114.157281, X, Y) && !ellipse(17886.093340, 33264.047200, 505.205615, 505.205615, 0.000000, X, Y) && !ellipse(21982.646362, 32347.068298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24908.712000, 30282.894000, 1315.296038, 1315.296038, 0.000000, X, Y) && !ellipse(25953.727740, 26569.075400, 1061.744031, 231.399207, 84.335275, X, Y) && !ellipse(27154.411200, 24325.794200, 668.780819, 375.094411, 349.005118, X, Y) && !ellipse(17395.317400, 23875.703400, 769.732822, 277.972008, 99.558921, X, Y) && !ellipse(36651.694000, 23579.526000, 1636.992047, 1636.992047, 0.000000, X, Y) && !ellipse(36523.519000, 23587.587400, 381.360011, 381.360011, 0.000000, X, Y) && !ellipse(21677.807800, 16628.734200, 868.520025, 868.520025, 0.000000, X, Y)
[Thu May 17 15:40:37 2012] Writing fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1.gif
[Thu May 17 15:40:54 2012] Mean detx,y = (226.77, -120.59) 
[Thu May 17 15:40:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 15:48:07 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 15:48:07 2012] Setting source spectrum file to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 15:48:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 17 17:06:02 2012] Updating aperture counts using extracted products
[Thu May 17 17:06:02 2012] Error reading totcts from fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 17:06:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 17:06:04 2012] Using photon index=1.80, rate=0.627, arf fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1.arf
[Thu May 17 17:06:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 17:06:04 2012] Updating source flux to 5.8e-12
[Thu May 17 17:08:01 2012] Reading fit data from xmm0096010101/analysis//spectral/fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 17 17:08:01 2012] Spectral fit parameter nH value = 1.80569e+14
[Thu May 17 17:08:01 2012] Spectral fit parameter PhoIndex value = 3.03024
[Thu May 17 17:08:01 2012] Failed to get F(0.3-8.0) from xmm0096010101/analysis//spectral/fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 17 17:08:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 17:08:01 2012] Using Nh = 1.8e+14, photon index=3.03, rate=0.627, arf fullrun_mos1_xmm0096010101_pi300-10000_pass1_cl_src1.arf
[Thu May 17 17:08:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 17:08:01 2012] Updating source flux to 4.5e-12