[Tue Jun 25 16:58:41 2013] Detection parameters:
  Position = (378.4, 212.6) = 8 2 59.65 -40 5 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.0 +/- 11.0
  Background counts = 27.8
  Rate = 0.001 +/- 0.0003

[Tue Jun 25 16:58:41 2013] Off-axis axis estimate = 8.50'
[Tue Jun 25 17:13:19 2013] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 17:13:19 2013] Initial guess for spatial extent in simple fitting = 10.68"
[Tue Jun 25 17:13:19 2013] source mask rpix=2.5, npix_max = 34, mask sum = 24, frac = 0.687
[Tue Jun 25 17:13:19 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.68"
[Tue Jun 25 18:42:55 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src14.ximg exists
[Tue Jun 25 18:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src14.csv
[Tue Jun 25 18:42:55 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Jun 25 18:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src14.csv
[Tue Jun 25 18:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 18:42:56 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Jun 25 18:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jun 25 18:42:56 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jun 25 18:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jun 25 18:42:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:35:45 2013] Spatial fit model total counts = 349.636000, observed total counts = 305.000000
[Tue Jun 25 20:35:45 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 20:35:45 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:35:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:35:45 2013] Assessing source extent using major
[Tue Jun 25 20:35:45 2013] Source does appear to be extended
[Tue Jun 25 20:35:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 20:35:45 2013] Deleting source due to low Poisson probability 0.8